Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, DFL, 12-Pin
- RS 제품 번호:
- 144-6560
- 제조사 부품 번호:
- SCA3300-D01-1
- 제조업체:
- Murata
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩63,995.20
재고있음
- 추가로 2025년 12월 29일 부터 13 개 단위 배송
- 추가로 2026년 1월 05일 부터 92 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 24 | ₩63,995.20 |
| 25 - 49 | ₩63,017.60 |
| 50 + | ₩61,645.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 144-6560
- 제조사 부품 번호:
- SCA3300-D01-1
- 제조업체:
- Murata
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Murata | |
| Sensor Type | Accelerometer | |
| Product Type | Sensor | |
| Number of Axis | 3 | |
| Technology | Capacitive 3D MEMS | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Maximum Frequency Response | 88Hz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | DFL | |
| Sensitivity | 5400LSB/g | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 12 | |
| Length | 8.6mm | |
| Width | 7 mm | |
| Standards/Approvals | No | |
| Height | 3.3mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Murata | ||
Sensor Type Accelerometer | ||
Product Type Sensor | ||
Number of Axis 3 | ||
Technology Capacitive 3D MEMS | ||
Mount Type Surface | ||
Interface Type SPI | ||
Maximum Frequency Response 88Hz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 3.6V | ||
Package Type DFL | ||
Sensitivity 5400LSB/g | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 12 | ||
Length 8.6mm | ||
Width 7 mm | ||
Standards/Approvals No | ||
Height 3.3mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- FI
Accelerometer ICs, Murata
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.
The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.
The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.
Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.
Accelerometers, Murata
관련된 링크들
- Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, DFL, 12-Pin
- Murata 3-Axis Surface Inclinometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- Murata 1-Axis Surface Inclinometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- Murata 3-Axis Surface High Performance Accelerometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, 24-Pin
- Murata 3-Axis Surface Accelerometer & Gyroscope 3 V 3.6 V, SPI, SOIC, 32-Pin
- Murata 6-Axis PCB Accelerometer & Gyroscope, SPI, SOIC, 32-Pin
- STMicroelectronics 3-Axis Surface Sensor 1.71 V 3.6 V, I2C/SPI, LGA, 16-Pin