Red Lion Magnetic Pick Up Stainless Steel 30V dc

모든 Motion Control Sensors 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 unit)*

₩314,800.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
  • 추가로 2026년 10월 01일 부터 7 개 단위 배송
  • 추가로 2026년 11월 12일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 4₩314,800.00
5 - 9₩306,960.00
10 +₩300,820.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
905-5289
제조사 부품 번호:
LMPC0000
제조업체:
Red Lion
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Red Lion

Product Type

Magnetic Pick Up

Body Style

Barrel

Housing Material

Stainless Steel

Terminal Type

3-Pin Connector

Maximum Supply Voltage

30V dc

Standards/Approvals

CSA, UL

Mount Type

Flush

COO (Country of Origin):
US

Logic Magnetic Pickups


Logic Magnetic Pickups Super Sensitive

LOGIC MAGNETIC PICKUPS (LMP’s) provide sensing sensitivities with

several orders of magnitude that are greater than standard magnetic pickups when

detecting moving ferrous targets. By locating a high gain pre-amplifier & signal

processing circuit inside the magnetic pick up housing, larger airgaps and slower

target surface speeds can be achieved, thereby greatly expanding application

versatility as compared with conventional magnetic pickups. Also these units

have excellent noise immunity and a frequency response to 10 KHz. The stainless

steel sensing pole is mounted flush to the plastic sensing face allowing greater

ease of setting airgaps and eliminating snagging the pole with a moving target.

Two output types are available:

The NPN OpenCollector Transistor Output unit provides a negative going current sinking

output with the approach of a ferrous target and is current limited to 40 mA.

The Open Collector units are available with either an integrally potted

10, 25 or 50 foot 3-wire shielded cable with neoprene strain relief boot or a

polarized 3-pin 5/8"-24 threaded connector for quick change versatility

The Transistor Emitter-Follower Output unit provides positive going 5 V

pulses with the approach of a ferrous target and can source 20 mA of load

current.

The Emitter-Follower output unit is

available in the 3-pin connector version only.

Super Sensitive

Current sinking output OR current sourcing output

Detects steel, sensing gears and other moving ferrous targets

Built in pulse shaping amplifier

Two output signal versions

¾” diameter stainless steel case

Epoxy encapsulated sensor for oil & dirt

Moisture resistant

Cable & connector

Red Lion


Note

LMPC000 – Cable with a length of 10 feet
LMPCCooo – 3 Pin connector

관련된 링크들