제조사부품번호

SICK MPS Series Position Sensor 30V dc

RS 제품 번호:: 786-5829
제조사 부품 번호:: MPS-160TSTP0 / 1050685
제조업체:: SICK

Subtotal (1 unit)*

₩729,820.00

제조사가 재고 비축중

2026년 10월 26일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩729,820.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 786-5829
제조사 부품 번호:: MPS-160TSTP0 / 1050685
제조업체:: SICK

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SICK
	Product Type	Position Sensor
	Series	MPS
	Terminal Type	4-Pin M8 Connector
	IP Rating	IP67
	Maximum Supply Voltage	30V dc
	Minimum Operating Temperature	-20°C
	Overall Depth	14.2mm
	Standards/Approvals	RoHS
	Overall Width	13.6mm
	Overall Height	173mm
	Mount Type	Drop-In
	Maximum Operating Temperature	70°C

	모두 선택
	브랜드 SICK
	Product Type Position Sensor
	Series MPS
	Terminal Type 4-Pin M8 Connector
	IP Rating IP67
	Maximum Supply Voltage 30V dc
	Minimum Operating Temperature -20°C
	Overall Depth 14.2mm
	Standards/Approvals RoHS
	Overall Width 13.6mm
	Overall Height 173mm
	Mount Type Drop-In
	Maximum Operating Temperature 70°C

COO (Country of Origin):: HU

SICK MPS Series Position Sensor, IP67, 30V Maximum Supply Voltage - MPS-160TSTP0 / 1050685

This position sensor provides continuous linear position measurement for pneumatic and profile cylinders in automation environments. It delivers an analogue output for integration with control systems and is designed for use where a sealed enclosure and straightforward electrical connection are required.

Features & Benefits

• Analogue voltage or current outputs enable direct PLC interfacing
• Operating supply range up to 30V supports industrial installations
• IP67-rated enclosure allows use in washdown or dusty environments
• Built-in teach-in simplifies on-site calibration and setup
• Typical resolution 0.03% FSR yields fine position discrimination
• Repeat accuracy 0.06% FSR ensures consistent measurement over cycles

Applications

• Suitable for piston position feedback on T-slot cylinders
• Ideal for integrating with SMC rail-guided actuators
• Used with dovetail groove cylinders for position monitoring
• Can be used for stroke measurement in profile and tie-rod cylinders
• Suitable for machine control requiring analogue displacement signals

What indicator informs about device status during operation?

A front-mounted LED provides immediate operational status and fault indication.

How is the sensor connected electrically in installations?

It uses a four-wire DC connection via an axial cable outlet with an M8 4-pin connector.

What environmental stresses can it withstand mechanically?

The unit tolerates shock up to 30g for 11ms and vibration from 10–55 Hz at 1mm amplitude.

How quickly does the output respond to position changes?

The sensor samples at approximately 1ms intervals, enabling Rapid feedback.

Are there limitations on cable handling in low temperatures?

The attached PUR cable must not be bent below 0°C to avoid damage.