SICK SFM60 Series Absolute Encoder 12V dc, 1024 ppr ppr, Sin/Cos Signal, Hollow Shaft Type, 15 mm Shaft

Subtotal (1 unit)*

₩1,613,839.50

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 5월 21일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,613,839.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
285-4250
제조사 부품 번호:
SFM60-HPBT0K02 / 1053366
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Encoder Technology

Absolute

Product Type

Encoder

Series

SFM60

Pulses Per Revolution

1024ppr

Output Signal Type

Sin/Cos

Shaft Type

Hollow Shaft

Shaft Diameter

15mm

Interface Type

HIPERFACE

Terminal Type

M12 Connector

IP Rating

IP65

Maximum Supply Voltage

12V dc

Minimum Operating Temperature

-40°C

Standards/Approvals

ACMA declaration of conformity, CE, CHINA-RoHS, EU declaration of conformity, MAR Declaration of Conformity, UK declaration of conformity

Maximum Operating Temperature

115°C

Switching Frequency

200kHz

Overview


SICK is rounding out its portfolio with the optical high-resolution SFS/SFM60 motor feedback systems in hollow shaft design. Especially with self- and force-ventilated synchronous motors, this mechanical component meets customer requirements, as do various hollow shafts and high protection classes (IP65). A wide variety of product variants fulfils nearly every requirement. The SFS/SFM60 motor feedback systems use a globally standardized interface.

It provides maximum flexibility and reduces installation times - plug & play at its best. The rugged shaft bearing increases the service life and at the same time reduces the servicing and maintenance requirements. It also achieves optimum concentricity and a previously unattainable low level of vibration even at maximum operating speeds.

At a glance


HIPERFACE® motor feedback system in singleturn and multiturn design, compatible with the world's leading drive systems

1,024 sine/cosine periods per revolution

Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system

Mechanical flexibility through different blind hollow shaft and through hollow shaft diameters (8 to 15 mm diameter), available with various stator couplings

IP65 protection class

Certified according to SIL2/PL d (only valid for SFS60S/SFM60S...)

Your Benefit


Convenient traceability and simple maintenance thanks to storage of motor-specific data in the electronic type label

Large ball bearing distances reduce uneven wear and minimize vibration on the encoder housing, which increases the encoder's service life

The nickel code disk offers a high degree of vibration resistance and an extended temperature range

Shorter development times through standardized mechanical interface

Platform for the future, since all electrical interfaces (TTL/HTL, 1Vpp, SSI, PROFIBUS, HIPERFACE DSL®) are or will be available in this mechanical component.

Applications


Factory automation

Drives and controls: Jerk-free acceleration and deceleration of elevator cars

Logistics automation

Building management: Speed measurement on the elevator engine

관련된 링크들