SICK TTK50 Series Absolute Absolute Encoder 12V dc, Binary Signal

모든 Motion Control Sensors 열람하기

Subtotal (1 unit)*

₩2,011,740.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 10월 30일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩2,011,740.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
267-2083
제조사 부품 번호:
TTK50-HXQ0-K02 / 1057793
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Absolute Encoder

Encoder Technology

Absolute

Series

TTK50

Output Signal Type

Binary

Stroke

25.4 mm

Terminal Type

Cable

IP Rating

IP67

Maximum Supply Voltage

12V dc

Minimum Operating Temperature

-30°C

Overall Depth

14mm

Standards/Approvals

CE

Overall Height

62mm

Overall Width

24mm

Maximum Operating Temperature

80°C

Mount Type

Flange

COO (Country of Origin):
DE

Overview


Precision, speed, dynamics, stiffness and high control accuracy - it is exactly these properties which play an important role in high-end applications in drive technology. The TTK50 linear measurement system has all these properties and is a very compact motor feedback system with HIPERFACE®interface. The magnetic principle of operation, the long measuring length, and the extremely high resolution open up all kinds of application possibilities for absolute position detection with linear motors. The TTK50 contains the newest sensor and evaluation technology. The sensor board aligned to the measuring plane is equipped with Hall sensors in two parallel tracks. Their arrangement corresponds with the division of the magnetic tape into an incremental and an absolute component.

To calculate the absolute position values during operation, the read head initially detects the absolute starting position when the linear motor starts. All other actual positions of the drive are then determined via the incremental position on the magnetic track or the sine/cosine signals.

At a glance


Absolute, non-contact, wear-free length measurement system for linear motors

Measured lengths of up to 1 m

Suitable for high traverse speeds of up to 10 m/s

Reliable location positioning even in the event of condensation and contamination of the magnetic tape

Electronic type label and programming of the position value

Absolute location positioning, no reference run

HIPERFACE®

interface

Certified according to SIL2 and PL d

Your Benefit


Reference traverse no longer necessary due to absolute measuring system

Maintenance-free thanks to non-contact measuring principle

Simple integration of the system due to the HIPERFACE®

interface

Developed specifically for use in linear direct drives

Also for use in rough ambient conditions

Certification allows for easy integration into a safe drive system

관련된 링크들