Infineon OptiMOS 5 Type N-Channel MOSFET, 45 A, 60 V Enhancement, 3-Pin TO-252 IPD053N06NATMA1

RS 제품 번호:: 906-4491
제조사 부품 번호:: IPD053N06NATMA1
제조업체:: Infineon

Infineon OptiMOS 5 Type N-Channel MOSFET, 45 A, 60 V Enhancement, 3-Pin TO-252 IPD053N06NATMA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 10 units)*

₩21,720.00

4,430 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
10 - 620	₩2,172.00	₩21,720.00
630 - 1240	₩2,120.00	₩21,200.00
1250 +	₩2,084.00	₩20,840.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 906-4491
제조사 부품 번호:: IPD053N06NATMA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	MOSFET
	Channel Type	Type N
	Maximum Continuous Drain Current Id	45A
	Maximum Drain Source Voltage Vds	60V
	Package Type	TO-252
	Series	OptiMOS 5
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	8mΩ
	Channel Mode	Enhancement
	Forward Voltage Vf	1.2V
	Typical Gate Charge Qg @ Vgs	27nC
	Maximum Power Dissipation Pd	83W
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	175°C
	Standards/Approvals	No
	Height	2.41mm
	Length	6.73mm
	Automotive Standard	No

	모두 선택
	브랜드 Infineon
	Product Type MOSFET
	Channel Type Type N
	Maximum Continuous Drain Current Id 45A
	Maximum Drain Source Voltage Vds 60V
	Package Type TO-252
	Series OptiMOS 5
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 8mΩ
	Channel Mode Enhancement
	Forward Voltage Vf 1.2V
	Typical Gate Charge Qg @ Vgs 27nC
	Maximum Power Dissipation Pd 83W
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 175°C
	Standards/Approvals No
	Height 2.41mm
	Length 6.73mm
	Automotive Standard No

Infineon OptiMOS 5 Series MOSFET, 60V Maximum Drain Source Voltage, 45A Maximum Continuous Drain Current - IPD053N06NATMA1

This MOSFET is an N‑channel enhancement device designed for high‑current switching in surface‑mounted power assemblies. It operates across a wide ambient range for demanding thermal environments and is intended for applications where low conduction losses and rapid switching are required. The device supports standard drive voltages and provides a controlled forward conduction characteristic suitable for modern power conversion and motor‑drive topologies.

Features and Benefits:

• 8mΩ Rds(on) reduces conduction losses and improves efficiency
• 45A continuous drain current supports high‑current designs
• 27nC typical gate charge enables faster switching transitions
• 83W maximum power dissipation allows high‑power operation
• 20V gate tolerance accommodates common gate‑drive schemes

Applications

• Suitable for synchronous buck converters in power supplies
• Ideal for three‑phase motor inverter half‑bridges
• Used with battery management systems in high‑current paths
• Can be used for DC‑DC conversion in telecoms equipment
• Appropriate for load‑switching in industrial automation units

What gate‑drive considerations affect switching performance?

Driving the gate towards the 20V limit reduces on‑resistance but increases switching losses

selecting a driver that balances voltage and slew rate optimises efficiency and electromagnetic behaviour.

How should thermal conditions be managed for continuous operation?

With an 83W dissipation rating, heatsinking and PCB copper area must be sized to maintain junction temperatures within the device’s -55°C to 175°C operational range for reliable long‑term operation.

What mechanical constraints affect PCB layout for this device?

The TO‑252 surface‑mount package requires attention to pad geometry and thermal vias to transfer heat from the solderable package base into the board’s thermal planes.

How does forward voltage influence conduction calculations?

A typical forward voltage of 1.2V should be included when calculating voltage drop and power loss in conduction intervals, particularly under high‑current conditions.