Vishay EF Type N-Channel Power MOSFET, 38 A, 600 V Enhancement, 8-Pin PowerPAK SIHR100N60EF-T1GE3

RS 제품 번호:: 653-077
제조사 부품 번호:: SIHR100N60EF-T1GE3
제조업체:: Vishay

Vishay EF Type N-Channel Power MOSFET, 38 A, 600 V Enhancement, 8-Pin PowerPAK SIHR100N60EF-T1GE3

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 reel of 3000 units)*

₩23,268,000.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당	릴당*
3000 +	₩7,756.00	₩23,269,800.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 653-077
제조사 부품 번호:: SIHR100N60EF-T1GE3
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	38A
	Maximum Drain Source Voltage Vds	600V
	Series	EF
	Package Type	PowerPAK
	Mount Type	Surface
	Pin Count	8
	Maximum Drain Source Resistance Rds	0.108Ω
	Channel Mode	Enhancement
	Maximum Power Dissipation Pd	347W
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	35nC
	Maximum Gate Source Voltage Vgs	30V
	Forward Voltage Vf	1.2V
	Maximum Operating Temperature	150°C
	Length	10.42mm
	Width	8mm
	Standards/Approvals	RoHS
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 38A
	Maximum Drain Source Voltage Vds 600V
	Series EF
	Package Type PowerPAK
	Mount Type Surface
	Pin Count 8
	Maximum Drain Source Resistance Rds 0.108Ω
	Channel Mode Enhancement
	Maximum Power Dissipation Pd 347W
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 35nC
	Maximum Gate Source Voltage Vgs 30V
	Forward Voltage Vf 1.2V
	Maximum Operating Temperature 150°C
	Length 10.42mm
	Width 8mm
	Standards/Approvals RoHS
	Automotive Standard No

Datasheet - SIHR100N60EF-T1GE3

COO (Country of Origin):: CN

Vishay Series EF Power MOSFET, 600V Drain Source Voltage, 38A Maximum Continuous Drain Current - SIHR100N60EF-T1GE3

This power MOSFET is a high-voltage N-channel switch designed for surface-mount power conversion and switching applications. It operates within a broad temperature range suitable for demanding industrial environments and is intended for use where robust drain-source voltage handling and elevated power dissipation are required. The component is supplied in a low-profile PowerPAK package to support Compact board layouts and effective thermal management.

Features and Benefits:

• 600V maximum Vds delivers high-voltage switching capability • 38A continuous drain current enables substantial load handling • 0.108Ω Rds(on) minimises conduction losses at rated current • 347W maximum Pd supports high-power dissipation needs • 35nC typical gate charge aids efficient switching performance

Applications

• Suitable for high-voltage switch-mode power supplies • Ideal for industrial motor drive inverter stages • Used for power factor correction circuits in AC systems • Can be used for DC-DC converters in automation equipment • Suitable for high-voltage switching in power distribution units

What limits should I observe for gate-drive voltage?

The gate-source voltage must not exceed 30V to prevent gate dielectric stress.

How does thermal endurance relate to operating limits?

The device is rated to operate up to 150°C junction temperature, allowing continued operation under elevated thermal conditions with appropriate PCB heat-sinking.

What is the acceptable ambient temperature range for deployment?

It supports operation down to -55°C, making it suitable for low-temperature industrial environments.

How many pins does the package provide for board connection?

The component uses an 8-pin configuration in the PowerPAK surface-mount package.

Is this intended for automotive qualification?

It is not specified as meeting automotive standard approvals.