Omron Voltage Monitoring Relay, 1 Phase, SPDT, 1 → 10V ac/dc

모든 Monitoring Relays 열람하기

Subtotal (1 unit)*

₩277,112.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩277,112.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
819-3292
제조사 부품 번호:
K8AK-VW2 100-240VAC
제조업체:
Omron
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Omron

Monitoring Application

Voltage

Electrical Phase

1

Voltage Sensing Range

1 → 10 V ac/dc, 15 → 150 V ac/dc, 3 → 30V ac/dc

Contact Configuration

SPDT

Voltage Sensitivity

Overvoltage, Undervoltage

Time Delay

0.1 → 30s

Series

K8AK-VW

Dimensions

22.5 x 100 x 95mm

Maximum Voltage Sensed

10 V ac/dc, 30 V ac/dc, 150V ac/dc

Minimum Operating Temperature

-20°C

Width

100mm

Maximum Operating Temperature

+60°C

Operating Temperature Range

+60°C

Height

95mm

Minimum Voltage Sensed

1 V ac/dc, 3 V ac/dc, 15V ac/dc

Length

22.5mm

Omron K8AK-VS/VW Monitoring Relays


Manual resetting and automatically resetting supported by one relay
Pre-alarm monitoring mode
Compact housings
Resistant to high-frequency noise
Compliance with global power and safety standards

The Omron K8AK series monitoring relays are expertly designed for accurate and reliable monitoring of industrial facilities and equipment. The K8AK-VW/VS relays are ideal for monitoring overvoltages and undervoltages, which the K8AK-VW can do simultaneously.

K8AK-VS/VW


K8AK-TH



K8AK-VS/VW


K8AK-VW2 Monitoring Relay.


• Monitors over and under voltages simultaneously.
• Separate settings and outputs supported for over and under voltages.
• Manual reset and auto resetting supported by 1 relay.
• Pre-alarm monitoring mode.
• Two SPDT output relay. 5 A at 250 V ac (resistive load)
• LED output status indicator.
• Process control signal (0 to 10 V) current splitter input supported.
• Input frequency 40 Hz to 500 Hz
• Inputs isolated from the power supply

K8AK-VW2 100-240 VAC Model.


• Monitoring Relay.
• Power supply 100 V ac to 240 V ac.
• Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac/dc.

Features and Benefits.


• Power supply (isolated) 24 V ac/dc, 100 to 240 V ac.
• Manual/ Automatic reset (switchable)
• Manual reset – Turn OFF the power supply for minimum of 1 sec.
• Power on lock time 1 s or 5 s (using DIP switch)
• Green LED Power (PWR)
• Yellow LED Relay output (RY)
• Red LED Relay output (ALM)
• Two SPDT relays normally closed (NC)
• DIN Rail Mounted
• Weight 150 g
• Case material PC and ABS, UL 94 V-0
• Colour N1.5
• Protection IP20 (terminals)

What is a Monitoring / Measuring Relay?


A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

Types of Monitoring Relays Available?


• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


Standards

UL 60947-5-1, UL 508, IP 20

관련된 링크들