Carlo Gavazzi NFC Reader

모든 Monitoring Relays 열람하기

Subtotal (1 unit)*

₩245,321.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 13 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩245,321.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
165-1485
제조사 부품 번호:
ACR1252U
제조업체:
Carlo Gavazzi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Carlo Gavazzi

Series

ACR

Dimensions

98 x 65 x 12.8mm

Width

65mm

Maximum Operating Temperature

+50°C

Height

12.8mm

Operating Temperature Range

+50°C

Length

98mm

Minimum Operating Temperature

0°C

Special Features

Supports Android 3.1 & Later, USB Firmware Upgradeability, USB Full Speed Interface

Terminal Type

PCB Pin

COO (Country of Origin):
CN
The DPD Series settings can easily be modified through an Android App via a smartphone/tablet or via a USB NFC Reader/Writer connected to a computer. Under and over threshold settings can be set, as well as hysteresis and time delays. They are uploaded into the DPD Series by means of its NFC configuration. Neither potentiometer settings nor DIP switches are used for the device set-up, and after it is set-up, it can be password protected, to ensure safety while in use. The DPD02DM44B is delivered with default settings for North American 3-phase 240VAC mains, whereas the DPD02DM44 is delivered with European/Asian settings for 3-phase 400VAC mains.

3-phase voltage and frequency monitoring relay
Nominal measurement range from 177-552 VAC L-L and 102-318 VAC L-N
Star or Delta mains
NFC configuration
Adjustable set-points, hysteresis, delays, AND/OR logic
Three diagnostic LEDs
Operating frequency from 45 to 440Hz
Two independent SPDT 8 Amp outputs