ABB Monitoring Relay, 1 Phase, SPST, DIN Rail 24/240 V ac
- RS 제품 번호:
- 464-508
- 제조사 부품 번호:
- 1SVR550800R9300 CM-MSE
- 제조업체:
- ABB
Subtotal (1 unit)*
₩113,006.80
재고있음
- 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩113,006.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 464-508
- 제조사 부품 번호:
- 1SVR550800R9300 CM-MSE
- 제조업체:
- ABB
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | ABB | |
| Product Type | Monitoring Relay | |
| Function | Motor Control | |
| Electrical Phase | 1 | |
| Contact Configuration | SPST | |
| Mount Type | DIN Rail | |
| Switching Voltage | 250 V ac | |
| Terminal Type | Screw | |
| IP Rating | IP50, IP20 | |
| Contact Current | 4A | |
| Minimum Operating Temperature | -20°C | |
| Supply AC Voltage | 24/240 V ac | |
| Maximum Operating Temperature | 60°C | |
| Length | 78.5mm | |
| Width | 22.5 mm | |
| Series | CM-MSE | |
| Standards/Approvals | IEC947-1, VDE 0100 | |
| Height | 78mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 ABB | ||
Product Type Monitoring Relay | ||
Function Motor Control | ||
Electrical Phase 1 | ||
Contact Configuration SPST | ||
Mount Type DIN Rail | ||
Switching Voltage 250 V ac | ||
Terminal Type Screw | ||
IP Rating IP50, IP20 | ||
Contact Current 4A | ||
Minimum Operating Temperature -20°C | ||
Supply AC Voltage 24/240 V ac | ||
Maximum Operating Temperature 60°C | ||
Length 78.5mm | ||
Width 22.5 mm | ||
Series CM-MSE | ||
Standards/Approvals IEC947-1, VDE 0100 | ||
Height 78mm | ||
ABB Monitoring Relay, 4kV Rated Impulse Withstand Voltage, 50/60Hz Supply Voltage Frequency - CM-MSE Series - 1SVR550800R9300 CM-MSE
Keeping tabs on temperature is a cinch with this monitoring relay from ABB. You can use it to control motors hooked up to a PTE sensor (such as 103-8133). If your motor runs too hot, this unit's internal wire system snaps and your equipment is reset, to prevent damage caused by overheating. A long electrical life of 100,000 cycles means you can rely on this component over long periods. Install it alongside small engines, hot-air ventilators or heating installations to keep them running smoothly.
Features & Benefits
• Works safely in a temperature range between -20°C and +60°C
• Snap-on mounting makes installation on a DIN rail a breeze
• Low 110g weight won't put strain on your setup
Applications
• Manufacturing lines
• Power generation and distribution facilities
• Water treatment plants
• Data centres
Where can I use this monitoring relay?
This unit's housing is IP50-rated and its terminals have an IP20 rating. This means it's touch-proof and protected from objects larger than 12mm. For optimal performance, mount it in a clean, indoor area or sealed cabinet.
관련된 링크들
- ABB Monitoring Relay, 1 Phase, SPST, DIN Rail 240 V ac
- ABB Monitoring Relay, 3 Phase, DPDT, DIN Rail, 720 V ac
- ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 240 V ac 240 V dc
- ABB Monitoring Relay, 1 Phase, SPDT, DIN Rail, 240 V ac 240 V dc
- ABB Monitoring Relay, 3 Phase, DPDT, DIN Rail, 240 V ac 240 V dc
- ABB Monitoring Relay, 1, 3 Phase, SPST, DIN Rail
- ABB Monitoring Relay, 3, 1 Phase, DPDT, DIN Rail, 240 V ac 240 V dc
- ABB Monitoring Relay, 3, 1 Phase, SPDT, DIN Rail, 240 V ac 240 V dc