KEMET 470 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface
- RS 제품 번호:
- 175-7739
- 제조사 부품 번호:
- C1210X474KARACAUTO
- 제조업체:
- KEMET
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 pack of 10 units)*
₩20,221.50
일시적 품절
- 2026년 6월 26일 부터 1,000 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 240 | ₩2,022.15 | ₩20,221.50 |
| 250 - 490 | ₩1,979.25 | ₩19,792.50 |
| 500 + | ₩1,936.35 | ₩19,363.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 175-7739
- 제조사 부품 번호:
- C1210X474KARACAUTO
- 제조업체:
- KEMET
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | KEMET | |
| Capacitance | 470nF | |
| Product Type | Multilayer Ceramic Capacitor | |
| Voltage | 250V dc | |
| Package/Case | 1210 | |
| Construction | Stacked | |
| Packaging | Tape & Reel | |
| Mount Type | Surface | |
| Dielectric | X7R | |
| Tolerance | ±10 % | |
| Automotive Standard | AEC-Q200 | |
| Minimum Operating Temperature | -55°C | |
| Termination Type | Solder | |
| Series | X FT-CAP | |
| Width | 2.6mm | |
| Length | 3.3mm | |
| Standards/Approvals | EIA 481, EIA 556, EIA 624, IPC-7351, J-STD-020, AEC-Q200 | |
| Height | 2.5mm | |
| Suppression Class | Class II | |
| Maximum Operating Temperature | 125°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 KEMET | ||
Capacitance 470nF | ||
Product Type Multilayer Ceramic Capacitor | ||
Voltage 250V dc | ||
Package/Case 1210 | ||
Construction Stacked | ||
Packaging Tape & Reel | ||
Mount Type Surface | ||
Dielectric X7R | ||
Tolerance ±10 % | ||
Automotive Standard AEC-Q200 | ||
Minimum Operating Temperature -55°C | ||
Termination Type Solder | ||
Series X FT-CAP | ||
Width 2.6mm | ||
Length 3.3mm | ||
Standards/Approvals EIA 481, EIA 556, EIA 624, IPC-7351, J-STD-020, AEC-Q200 | ||
Height 2.5mm | ||
Suppression Class Class II | ||
Maximum Operating Temperature 125°C | ||
- COO (Country of Origin):
- MX
The KEMET Flexible Termination (FT-CAP) multilayer ceramic capacitor in X7R dielectric incorporates a unique, flexible termination system that is integrated with KEMET’s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET’s standard termination system in order to establish pliability while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs – flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling.
−55°C to +125°C operating temperature range
Superior flex performance (up to 5 mm)
High capacitance flex mitigation
Lead (Pb)-free
Non-polar device, minimizing installation concerns
100% pure matte tin-plated termination finish allowing for excellent solderability
관련된 링크들
- KEMET 470 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface Mount
- KEMET 390 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface Mount
- KEMET 270 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface Mount
- KEMET 470 nF Multilayer Ceramic Capacitor, 50V dc, ±10 %, Surface Mount
- KEMET 470 nF Multilayer Ceramic Capacitor, 50V dc, ±5 %, Surface Mount
- KEMET 120 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface Mount
- KEMET 68 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface Mount
- KEMET 220 nF Multilayer Ceramic Capacitor, 250V dc, ±10 %, Surface Mount