대량 구매 할인 기용 가능
Subtotal (1 set)*
₩943,948.00
재고있음
- 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Set(s) | Per Set |
|---|---|
| 1 - 4 | ₩943,948.00 |
| 5 + | ₩776,872.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 667-3938
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Accuracy | ±0.004 mm | |
| Product Type | Micrometre | |
| Resolution | 0.001 mm | |
| Imperial/Metric | Metric | |
| Battery Operated | No | |
| Maximum Measurement | 20 mm | |
| Minimum Measurement | 12 mm | |
| Micrometre Type | Internal | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Accuracy ±0.004 mm | ||
Product Type Micrometre | ||
Resolution 0.001 mm | ||
Imperial/Metric Metric | ||
Battery Operated No | ||
Maximum Measurement 20 mm | ||
Minimum Measurement 12 mm | ||
Micrometre Type Internal | ||
Standards/Approvals No | ||
제외
RS PRO Internal Micrometer
This 3-point bore micrometer set is used to measure bore depths between 12 mm and 20 mm. It's particularly suitable for automotive and manufacturing applications where you need to measure the depth of a pipe or cylinder.
The micrometer set features an extension rod for extra-deep bore measurement and a calibration ring gauge to easily adjust the anvils back to zero. The anvils are made of tungsten carbide, which is resistant to impact and corrosion and lasts up to 100 times longer than steel. The thimble also has a satin chrome finish for increased hardness, giving you a durable and long-lasting set.
You'll find this product particularly handy for the automotive industry. It's commonly used to measure the holes in an engine block, ensuring a tight fit for pistons. As part of the RS PRO range, it meets our stringent quality and accuracy standards.
Features and Benefits
• Metric internal micrometer
• Accuracy of ±0.004 mm
• Resolution of 0.001 mm
• Minimum measurement of 12 mm
• Maximum measurement of 20 mm
• No batteries required
• Supplied in a storage case with a calibration ring gauge
• Extension rod for extra deep bore measurement
• Tungsten carbide anvils
• Thimble with satin chrome finish
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.