Microchip, 8bit AVR, ATtiny204 Microcontroller, 20MHz, 2 kB Flash, 20-Pin SOIC

Subtotal (1 pack of 25 units)*

₩21,902.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 08일 부터 575 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
25 +₩876.08₩21,902.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
193-6213
제조사 부품 번호:
ATTINY204-SSN
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Family Name

ATtiny204

Package Type

SOIC

Mounting Type

Surface Mount

Pin Count

20

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

2 kB

Maximum Frequency

20MHz

RAM Size

128 B

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

1

Typical Operating Supply Voltage

1.8 → 5.5 V

Number of I2C Channels

1

Number of UART Channels

0

Number of USART Channels

1

Number of CAN Channels

0

Maximum Number of Ethernet Channels

0

Instruction Set Architecture

RISC

Minimum Operating Temperature

-40 °C

Program Memory Type

Flash

Number of LIN Channels

0

Height

1.5mm

Width

4mm

Dimensions

8.75 x 4 x 1.5mm

Pulse Width Modulation

1 (3 Channel)

Length

8.75mm

Number of PCI Channels

0

Number of Ethernet Channels

0

ADCs

6 x 10 bit

Number of ADC Units

1

Maximum Operating Temperature

+85 °C

The ATtiny204 is a microcontroller using the 8-bit AVR® processor with hardware multiplier, running at up to 20MHz and 2KB Flash, 128B SRAM and 64 bytes of EEPROM in a 14-pin package. The series uses the latest technologies from Microchip with a flexible and low power architecture including Event System and SleepWalking, accurate analog features and advanced peripherals.

8-bit high-performance AVR RISC CPU
135 instructions
Hardware multiplier
Ultra Low Power (ULP)
Three sleep modes
Idle
Standby
Power Down
6 Channels Event System
Configurable Custom Logic (CCL)
12 Channel 10-bit ADC with Voltage Reference
Comparators
2x 16-bit Timer (TCA / TCB)
Cyclical Redundancy Check (CRC/SCAN)
Watchdog Timer (WDT)
Power-On Reset (POR)
Brown-Out Detection (BOD)
Single pin programming and debugging interface (UPDI)
Operation Voltage: 1.8V – 5.5V

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들