Microchip, 32bit microAptiv UC 32 bit, PIC32 Microcontroller, 25MHz, 64 kB Flash, 28-Pin QFN

모든 Microcontrollers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 61 units)*

₩168,808.96

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 08일 부터 305 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tube*
61 - 61₩2,767.36₩168,842.80
122 - 549₩2,712.84₩165,460.68
610 +₩2,658.32₩162,168.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
146-3263
제조사 부품 번호:
PIC32MM0064GPL028-I/ML
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Family Name

PIC32

Package Type

QFN

Mounting Type

Surface Mount

Pin Count

28

Device Core

microAptiv UC 32 bit

Data Bus Width

32bit

Program Memory Size

64 kB

Maximum Frequency

25MHz

RAM Size

8 kB

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

2

Number of UART Channels

2

Number of I2C Channels

2

Typical Operating Supply Voltage

2 → 3.6 V

Number of CAN Channels

0

Number of USART Channels

0

Maximum Number of Ethernet Channels

0

ADCs

12 x 10/12 bit

Length

6mm

Number of ADC Units

1

Maximum Operating Temperature

+105 °C

Instruction Set Architecture

RISC

Minimum Operating Temperature

-40 °C

Pulse Width Modulation

1 (8 Channel)

Dimensions

6 x 6 x 0.95mm

Width

6mm

Data Rate

25Mbit/s

Height

0.95mm

Number of LIN Channels

2

Number of Ethernet Channels

0

Number of PCI Channels

0

Program Memory Type

Flash

PIC32MMxxxxGPL 32-Bit Microcontrollers


Microchip 32-bit PIC32MM family microcontrollers with microAptiv™ UC core and ECC Flash program memory. They feature the microMIPS™ instruction set for 35% smaller code while retaining 98% performance compared to MIPS32 processors. These PIC32MM MCUs are from Microchip's lowest power and most cost-effective family of 32-bit PIC32 microcontrollers. They are high performance general purpose MCUs ideal for applications demanding low power and longer battery life.

Featuring core-independent peripherals, these MCUs offload key fucntions from the CPU. The devices are fully supported by Microchip’s MPLAB® Code Configurator (MCC) software to help simplify designs. Typical target applications include IoT sensor nodes, environmental monitoring devices, portable medical or fitness devices, building automation/control and low-cost motor control applications.

Microcontroller features:


High-performance 32-Bit RISC CPU
microMIPS™ instruction set
16-bit/32-bit wide instructions with 32-bit wide data path
Two sets of 32 register files (32-bit) to reduce interrupt latency
Single-cycle 32 x 16 multiply and two-cycle 32 x 32 multiply
+2.0 to +3.6V operating voltage
Low-power operation: 500 nA sleep current for RAM retention mode

Analogue features:


Up to 14-channel, software-selectable 10/12-Bit SAR ADC
Two analogue comparators with input multiplexing
5-bit DAC with output pin

Peripheral features:


Two 4-wire SPI modules (up to 25 Mbps) with I²S
Two UART modules with LIN
CRC module
Hardware real-time clock and calendar (RTCC)
Seven 16-Bit Timers
One multiple output module and two single output modules
Up to 20 peripheral pin select (PPS) re-mappable pins
Two configurable logic cells with internal connections to select peripherals and PPS

The PIC32MM family is Microchip's lowest power and most cost-effective family of 32-bit PIC32 microcontrollers. For applications demanding low power, longer battery life and space constraints, the PIC32MM devices offer sleep modes down to 500 nA and packages as small as 4 x 4 mm. This family features core independent peripherals, designed to offload the CPU, such as Configurable Logic Cellsand Multiple-output Capture Compare PWMs (MCCPs) which help enable sensorless BLDC motor control applications.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



High-performance 32-bit microcontrollers designed for: High Impact Graphics/User Interfaces, Ethernet/USB/CAN Connectivity, Multitasking Embedded Control, High Performance Audio

관련된 링크들