제조사부품번호

Honeywell Roller Lever Micro Switch, Quick Connect Terminal, 10 A, 125 V ac, SPCO

RS 제품 번호:: 820-7482
제조사 부품 번호:: V7-1B17D8-263
제조업체:: Honeywell

Honeywell Roller Lever Micro Switch, Quick Connect Terminal, 10 A, 125 V ac, SPCO

Subtotal (1 unit)*

₩6,128.80

재고있음

5 개 단위 배송 준비 완료
추가로 2026년 3월 25일 부터 134 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩6,128.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 820-7482
제조사 부품 번호:: V7-1B17D8-263
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Micro Switch
	Actuator Type	Roller Lever
	Terminal Type	Quick Connect
	Switch Contact Current	10 A
	Contact Configuration	SPCO
	Housing Material	Polycarbonate
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	82°C
	Contact AC Voltage	125V ac
	Microswitch Type	Miniature
	Width	10.2 mm
	Length	28.8mm
	Depth	18.2mm
	Hazardous Area Certification	No
	Standards/Approvals	RoHS, CSA, ENEC, UL
	Series	V7

	모두 선택
	브랜드 Honeywell
	Product Type Micro Switch
	Actuator Type Roller Lever
	Terminal Type Quick Connect
	Switch Contact Current 10 A
	Contact Configuration SPCO
	Housing Material Polycarbonate
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 82°C
	Contact AC Voltage 125V ac
	Microswitch Type Miniature
	Width 10.2 mm
	Length 28.8mm
	Depth 18.2mm
	Hazardous Area Certification No
	Standards/Approvals RoHS, CSA, ENEC, UL
	Series V7

COO (Country of Origin):: MX

Honeywell Series V7 Micro Switch, 10A Contact Current, 125V Contact AC Voltage - V7-1B17D8-263

This micro switch provides a compact, actuator-driven electrical switching solution for automation and control systems. Designed for environments requiring a small footprint and a roller lever actuator, it offers a straightforward single-pole changeover contact arrangement for switching AC loads in industrial and appliance contexts.

Features and Benefits:

• Rated for 10A current to handle moderate load switching requirements
• 125V AC contact rating for compatibility with common supply voltages
• Quick-connect terminals for efficient panel or harness installation
• Polycarbonate enclosure delivering electrical insulation and chemical resistance
• Operational range from -40 to 82 °C to suit varied ambient conditions

Applications

• Suitable for detecting mechanical end positions in conveyor systems
• Ideal for use as a limit input in industrial automation equipment
• Used with domestic and commercial appliances requiring lever actuation
• Can be used for safety interlock sensing on access panels

How is the switch mounted or connected in a control circuit?

The device uses flat quick-connect terminals allowing fast attachment to spade connectors or wiring harnesses without soldering.

What actuation style should be expected during installation?

It employs a roller lever actuator that converts linear or angular motion into a reliable switching action for mechanical interfaces.

Which approvals and standards are relevant when specifying this component?

It carries recognised approvals covering international safety and performance requirements suitable for many regulated applications.

What Terminal current capability should be considered for contact selection?

Contacts are specified to conduct currents up to 10 A, so downstream wiring and protection should match that capacity.

Standards

CSA, ENEC & UL