제조사부품번호

Honeywell Short Lever Micro Switch, PCB Terminal Terminal, 100mA, 125 V ac, 60 V dc, SPDT, IP40

RS 제품 번호:: 205-6121
제조사 부품 번호:: ZX10E20B01
제조업체:: Honeywell

Honeywell Short Lever Micro Switch, PCB Terminal Terminal, 100mA, 125 V ac, 60 V dc, SPDT, IP40

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 205-6121
제조사 부품 번호:: ZX10E20B01
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Short Lever
	Product Type	Micro Switch
	Terminal Type	PCB Terminal
	Housing Material	Polyamide
	Contact Configuration	SPDT
	IP Rating	IP40
	Operating Force	150g
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Contact AC Voltage	125V ac
	Contact DC Voltage	60V dc
	Microswitch Type	Subminiature
	Mechanical Life	3000000min
	Hazardous Area Certification	CQC, cUL, ENEC, RoHS, UL
	Length	12.8mm
	Depth	6.5mm
	Standards/Approvals	CQC, cUL, ENEC, RoHS, UL
	Width	5.8mm
	Series	ZX

	모두 선택
	브랜드 Honeywell
	Actuator Type Short Lever
	Product Type Micro Switch
	Terminal Type PCB Terminal
	Housing Material Polyamide
	Contact Configuration SPDT
	IP Rating IP40
	Operating Force 150g
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Contact AC Voltage 125V ac
	Contact DC Voltage 60V dc
	Microswitch Type Subminiature
	Mechanical Life 3000000min
	Hazardous Area Certification CQC, cUL, ENEC, RoHS, UL
	Length 12.8mm
	Depth 6.5mm
	Standards/Approvals CQC, cUL, ENEC, RoHS, UL
	Width 5.8mm
	Series ZX

COO (Country of Origin):: CN

Honeywell Series ZX Micro Switch, 125V Contact AC Voltage, 150g Operating Force - ZX10E20B01

This micro switch provides a Compact electromechanical switching solution for control and sensing tasks in industrial and electronic systems. It is designed as a subminiature device with a short lever actuator for precise mechanical interaction and is intended for PCB mounting in assemblies where a small form factor and predictable actuation are required.

Features and Benefits:

• PCB Terminal configuration enables direct board integration and neat assembly
• SPCO contact arrangement supports single-pole changeover switching
• Rated for AC and DC operation at 125V and 60V respectively for versatile circuits
• Low contact current handling of 100 mA minimises power draw in signal paths
• Operating force of 150 g provides repeatable tactile actuation response
• Operating range from −40 °C to 85 °C permits use across varied ambient conditions

Applications

• Suitable for limit sensing in automation equipment
• Ideal for input detection on control PCBs in electrical panels
• Used with small motors for end-stop detection in mechanical assemblies
• Can be used for user-interface switches on instrumentation boards
• Suitable for safety interlock detection in Compact devices

What material characteristics affect mounting and durability on a PCB?

The housing is MADE from a polyamide compound which offers electrical insulation and resistance to typical industrial handling stresses when mounted on a PCB.

How does the actuator type influence installation options?

The short lever actuator reduces required installation clearance, allowing tight placement near other components and enabling Compact mechanical linkages.

What approvals support its use in regulated equipment?

It carries multiple standards approvals relevant to component-level acceptance across several markets, facilitating inclusion in certified assemblies.

How should designers account for the switch’s current rating in circuit design?

Designers must ensure signal circuits do not exceed the 100 mA contact rating and provide appropriate suppression or buffering when switching inductive loads.