제조사부품번호

Honeywell Technologies Micro Switch

RS 제품 번호:: 560-301
Distrelec 제품 번호:: 301-38-877
제조사 부품 번호:: V3-19M
제조업체:: Honeywell Technologies

Subtotal (1 unit)*

₩27,160.00

195 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩27,160.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 560-301
Distrelec 제품 번호:: 301-38-877
제조사 부품 번호:: V3-19M
제조업체:: Honeywell Technologies

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell Technologies
	Product Type	Micro Switch
	Minimum Operating Temperature	-40°C
	Hazardous Area Certification	No
	Length	27.8mm
	Depth	10.16mm
	Mechanical Life	10000000Cycles
	Standards/Approvals	CSA, UL
	Width	19.3mm
	Series	V3

	모두 선택
	브랜드 Honeywell Technologies
	Product Type Micro Switch
	Minimum Operating Temperature -40°C
	Hazardous Area Certification No
	Length 27.8mm
	Depth 10.16mm
	Mechanical Life 10000000Cycles
	Standards/Approvals CSA, UL
	Width 19.3mm
	Series V3

Datasheet - V3 Series

COO (Country of Origin):: MX

Honeywell Micro Switch, 15.1A Current Rating, 250V AC Voltage Rating - V3-19M

This micro switch is a Compact electromechanical device designed to provide a discrete change of electrical state in control and sensing circuits. It serves as a switch element within automation and electrical systems where a fast, defined actuation is required. It is intended for use in installations that demand a single-changeover contact configuration and is compatible with AC mains applications at typical industrial voltages.

Features and Benefits:

• Single-pole double-throw contact for versatile circuit control
• Rated for 15.1A enabling higher current handling in a small form
• Designed for operation on 250V AC to suit mains-level circuits
• Snap-action mechanism for rapid, consistent contact transition
• Suits panel or equipment mounting for straightforward replacement

Applications

• Suitable for limit switching in industrial automation equipment
• Ideal for interlock switches in electrical control panels
• Used with motor starters to detect position changes
• Can be used for safety cut-out in mechanical assemblies
• Suitable for retrofit as a replacement switch in legacy systems

What contact arrangement does it provide?

It uses a single-pole double-throw configuration, allowing one input to be switched between two outputs for changeover control.

What current can it safely switch in typical AC applications?

The device is specified to carry and switch currents up to 15.1A under its rated operating conditions.

At what AC voltage is it intended to operate?

It is designed for operation on alternating current systems at 250V AC.

Is the mechanism suited to repeatable actuation cycles?

The internal snap-action mechanism delivers a fast, repeatable contact transition suited to frequent operation.