Eaton xEffect xEffect Miniature Circuit Breaker, 2-Pole, 10 A, Type C, 415 V ac AC, 60 V dc DC, 10 kA Breaking Capacity

Subtotal (1 unit)*

₩168,899.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 3월 02일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩168,899.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
847-3245
Distrelec 제품 번호:
304-02-372
제조사 부품 번호:
102167 FAZ-C10/2-NA
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Number of Poles

2

Product Type

Miniature Circuit Breaker

Current Rating

10 A

Tripping Characteristics

Type C

Rated AC Voltage

415 V ac

Rated DC Voltage

60 V dc

Mount Type

DIN Rail

Breaking Capacity

10kA

Range

xEffect

Series

xEffect

Terminal Type

Screw

IP Rating

IP20

Depth

76mm

Width

76 mm

Standards/Approvals

No

Tripping Mechanism

Thermal Magnetic

Reset Actuator Type

Toggle Switch

Break Time

Instantaneous

COO (Country of Origin):
RO

Eaton MCB, Instantaneous Breaking Type, 3.6W Maximum Heat Loss - FAZ Series - 102167 FAZ-C10/2-NA


Stop pesky power issues in their tracks with this MCB from Eaton. Its type-C tripping characteristic indicates that it breaks when it receives loads five to ten times its 10A rating to pull the plug on damaging overcurrent. As the breaker trips instantaneously, it cuts off power faults before they can cause damage. You don't need to worry about electrical spikes, as it shuts down surges up to 10kA. Monitoring linked circuits is no trouble thanks to the two-pole format. MCBs like this protect workshop equipment and automotive manufacturing systems.

Features & Benefits


• Slim dimensions of 35.4 (W) x 75.5 (H) x 105mm (D) to slot easily into a busy setup

• Front-mounted toggles for quick resetting

• Labelled terminals help you line up wiring easily

• Service life of at least 20,000 electrical operations to reliably stop faults over a long lifespan

• Trip indicators clearly show circuit status for speedy spot-checks

Do I need any special tools to install this unit?


No, this MCB clips onto a DIN rail and has screw terminals, so there's no need to break out special tools during installation.

Note

Eaton formerly known as Moeller

관련된 링크들