제조사부품번호

ABB System Pro M Compact S200 M UC Circuit Breaker, 2-Pole, 4A, Type K, 440V ac AC, 440 V dc DC, 10 kA Breaking Capacity

RS 제품 번호:: 287-6363
Distrelec 제품 번호:: 302-42-358
제조사 부품 번호:: 2CDS272061R0337
제조업체:: ABB

ABB System Pro M Compact S200 M UC Circuit Breaker, 2-Pole, 4A, Type K, 440V ac AC, 440 V dc DC, 10 kA Breaking Capacity

모든 MCBs 열람하기

Subtotal (1 unit)*

₩297,600.00

재고있음

9 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩297,600.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 287-6363
Distrelec 제품 번호:: 302-42-358
제조사 부품 번호:: 2CDS272061R0337
제조업체:: ABB

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB
	Product Type	Circuit Breaker
	Number of Poles	2
	Current Rating	4A
	Tripping Characteristics	Type K
	Rated AC Voltage	440V ac
	Rated DC Voltage	440V dc
	Mount Type	DIN Rail
	Breaking Capacity	10kA
	Range	System Pro M Compact
	Series	S200 M UC
	Terminal Type	Screw
	IP Rating	IP40, IP20
	Width	35mm
	Standards/Approvals	UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, CSA 22.2 No. 235
	Height	88mm
	Depth	69mm
	Reset Actuator Type	Toggle

	모두 선택
	브랜드 ABB
	Product Type Circuit Breaker
	Number of Poles 2
	Current Rating 4A
	Tripping Characteristics Type K
	Rated AC Voltage 440V ac
	Rated DC Voltage 440V dc
	Mount Type DIN Rail
	Breaking Capacity 10kA
	Range System Pro M Compact
	Series S200 M UC
	Terminal Type Screw
	IP Rating IP40, IP20
	Width 35mm
	Standards/Approvals UL 1077, IEC/EN 60947-2, IEC/EN 60898-1, CSA 22.2 No. 235
	Height 88mm
	Depth 69mm
	Reset Actuator Type Toggle

COO (Country of Origin):: DE

ABB S200 M UC Series Circuit Breaker, 4A Current, 440V Rated AC Voltage - 2CDS272061R0337

This circuit breaker provides overcurrent protection for two-pole installations in electrical systems. It is designed for DIN-rail mounting and offers manual reclosure via a toggle reset actuator. The device is intended for use where Compact protection and straightforward screw-terminal connections are required.

Features and Benefits:

• 10kA breaking capacity enhances fault interruption capability
• Type K tripping delivers selective response to overloads
• 2-pole configuration enables simultaneous isolation of both conductors
• Screw terminals allow robust conductor termination and maintenance
• IP40 and IP20 ratings offer Basic ingress protection in panel environments

Applications

• Suitable for control panels requiring Compact overcurrent protection
• Ideal for DC bus protection up to 440V d.c. systems
• Used with AC distribution at voltages up to 440V a.c.
• Can be used for machinery secondary circuits needing selective tripping
• Suitable for installations on standard DIN-rail assemblies

What is the rated current and how does it affect circuit selection?

The device is rated at 4A and should be chosen to match expected load currents while providing a protective margin.

Which mounting method is required for installation?

It is designed for DIN-rail mounting to fit standard control panel rails.

How are conductors connected to the device?

Connections are MADE via screw-type terminals for secure wiring termination.

What reset method is provided after a trip event?

A toggle actuator permits manual reset following an interruption.