RS PRO 1 Matrix Board FR2 1.02 mm Holes, 220 mm 100 mm
- RS 제품 번호:
- 159-6322
- Distrelec 제품 번호:
- 304-02-702
- 제조업체:
- RS PRO
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩32,016.40
재고있음
- 71 개 단위 배송 준비 완료
- 추가로 2026년 3월 13일 부터 106 개 단위 배송
- 추가로 2026년 4월 10일 부터 58 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩32,016.40 |
| 10 - 39 | ₩31,057.60 |
| 40 + | ₩29,516.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 159-6322
- Distrelec 제품 번호:
- 304-02-702
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Product Type | Matrix Board | |
| Number of Sides | 1 | |
| Length | 220mm | |
| Width | 100 mm | |
| Board Material | Synthetic Resin Bonded Paper | |
| Hole Diameter | 1.02mm | |
| FR Material Grade | FR2 | |
| Copper Thickness | 35μm | |
| Standards/Approvals | DIN 41494, DIN 41612 | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Product Type Matrix Board | ||
Number of Sides 1 | ||
Length 220mm | ||
Width 100 mm | ||
Board Material Synthetic Resin Bonded Paper | ||
Hole Diameter 1.02mm | ||
FR Material Grade FR2 | ||
Copper Thickness 35μm | ||
Standards/Approvals DIN 41494, DIN 41612 | ||
- COO (Country of Origin):
- GB
RS PRO Single-Sided DIN 41612 Matrix Board FR2 with 1.02 mm Holes, 2.54 x 2.54 mm Pitch, 220 x 100 mm
Choose this single-sided Eurocard matrix board from RS PRO when you need a low-cost prototype circuit board to securely layout your components. You can use it primarily to wire general discrete components, which you can find applied in amplifiers and electronic products using large amounts of current. It's also useful when you need to connect a number of common bus or signal lines.
The board conforms to DIN 41494 standards specifying practices for electronic equipment and mechanical structures of 19-inch series, which means you can use it with the standard rack-based electrical systems and card frames. It's also compatible with Microbus backplane connectors.
Matrix boards allow you to build a prototype PCB and keep all the parts of your circuit easily accessible. You can also use them as a pre-design layout matrix you can then copy onto a standard PCB.
Features and Benefits
• Synthetic resin bonded paper base material
• DIN 41612 connection
• Copper thickness of 35 μm
• Dimensions of 220 x 100 mm
• FR2 material grade
• Hole diameter of 1.02 mm
• Hole pitch of 2.54 x 2.54 mm
• Single-sided
관련된 링크들
- RS PRO 1 Matrix Board FR4 1.02 mm Holes, 220 mm 100 mm
- Vero Technologies 1 Matrix Board FR4 With 75 x 86 1.02 mm Holes, 233.4 mm 220 mm
- RS PRO 1 Matrix Board FR2 1.02 mm Holes, 160 mm 100 mm
- RS PRO 2 Matrix Board FR4 With Square Pad 1.02 mm Holes, 2.54 mm Pitch, 220 mm 100 mm
- Vero Technologies 1 Matrix Board FR4 With 77 x 34 1.02 mm Holes, 2.54 mm Pitch, 220 mm 100 mm
- RS PRO 2 Matrix Board FR4 With Pth Square Pad 1.02 mm Holes, 2.54 mm Pitch, 233.4 mm 220 mm
- RS PRO 1 Matrix Board FR2 With 34 x 64 1.02 mm Holes, 160 mm 100 mm
- RS PRO 1 Surface Mount (SMT) Board FR4 1.02 mm Holes, 220 mm 100 mm