SCHAEFFLER Hose Connector for use with Connector Extension Lubricator

Subtotal (1 unit)*

₩29,564.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 11월 23일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩29,564.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
310-143
제조사 부품 번호:
ARCALUB-X.TUBEFIT-M10X1-SAT106W
제조업체:
SCHAEFFLER
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SCHAEFFLER

Product Type

Connector Extension

Standards/Approvals

No

Length

14.22mm

Thread Size

M10 x 1

For Use With

Lubricator

Accessory Type

Hose Connector

Orientation

Angled

Width

13mm

제외

SCHAEFFLER Connector Extension, 14.22mm Length, M10 x 1 Thread Size - ARCALUB-X.TUBEFIT-M10X1-SAT106W


This connector extension links a lubricator to tubing in industrial lubrication systems, providing an angled connection for installations where straight fittings are impractical. It is intended for use as a hose connector in maintenance and assembly tasks across automation, electrical and mechanical environments, allowing lubricator outputs to be routed reliably into lubrication tubes.

Features and Benefits:


• Angled orientation for restricted-space routing
• Threaded Interface M10x1 for secure engagement
• Compact length 14.22mm enables low-profile fitting
• 13mm width for stable connection to tubing
• Compatible with lubricator assemblies for direct coupling

Applications


• Suitable for connecting lubricators to tubing in automated machinery
• Ideal for tight-space lubrication points on production lines
• Used with pneumatic lubrication modules in maintenance setups
• Can be used for retrofitting existing lubricant distribution networks

What thread specification should I match on mating components?


Use a mating port with an M10 x 1 thread to ensure correct mechanical engagement and sealing.

How does the connector handle space-constrained installations?


Its angled orientation combined with a 14.22mm fitting length reduces protrusion, allowing routing around adjacent components.

Is this suitable for replacing straight fittings on a lubricator?


Yes, it functions as an accessory hose connector to change the flow direction between the lubricator and tube runs.

What physical footprint should I account for when planning assembly layout?


Allow for a 13mm width at the connection point to provide clearance for tightening and tube alignment.

관련된 링크들