Subtotal (1 unit)*
₩46,755.15
재고있음
- 추가로 2026년 6월 01일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩46,755.15 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 268-9918
- 제조사 부품 번호:
- PHF FX40-40X65
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Keyless Bush | |
| Torque Rating | 1640Nm | |
| Length | 48mm | |
| Series | FX40 | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Keyless Bush | ||
Torque Rating 1640Nm | ||
Length 48mm | ||
Series FX40 | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- CN
SKF FX40 Series Keyless Bushing, 48mm Length, 65mm Outside Diameter - PHF FX40-40X65
This keyless bushing provides a mechanical means to clamp shafts to hubs for torque transmission in industrial assemblies. It is intended for heavy-duty shaft locking where a compact, non-keyed connection is required and is suited to environments found in automation, electrical and mechanical plant systems.
Features & Benefits
• Robust outside diameter ensures stable hub engagement at 65mm OD
• Short axial length allows Compact shaft-to-hub joins at 48mm
• Keyless design eliminates keyways for simplified installation
• Manufacturer specification supports consistent interchangeability
• Short axial length allows Compact shaft-to-hub joins at 48mm
• Keyless design eliminates keyways for simplified installation
• Manufacturer specification supports consistent interchangeability
**Applications**
• Suitable for coupling motors to gearboxes in automation systems
• Ideal for mounting pulleys and sprockets on driven shafts
• Used with servo and stepper drives requiring Compact locking
• Can be used for retrofitting shafts in industrial machinery
• Used for mechanical drives where removal and repositioning are frequent
• Ideal for mounting pulleys and sprockets on driven shafts
• Used with servo and stepper drives requiring Compact locking
• Can be used for retrofitting shafts in industrial machinery
• Used for mechanical drives where removal and repositioning are frequent
What torque capacity should I expect during normal operation?
The device is rated to transmit up to 1640 Nm, which defines its nominal load capacity for continuous torque transfer under correct installation.
What shaft–hub Interface size does it accommodate externally?
The unit presents an external diameter of 65mm for matching to hubs and mating components during assembly.
How much axial space will the bushing occupy on the shaft?
Its axial length measures 48mm, which determines the minimum available shaft clearance required for installation.