Igus T Series, TS-01-20-1000, Linear Guide Rail 20 mm width 1000 mm Length
- RS 제품 번호:
- 311-3733
- 제조사 부품 번호:
- TS-01-20-1000
- 제조업체:
- Igus
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 unit)*
₩143,160.00
재고있음
- 추가로 2026년 8월 10일 부터 26 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩143,160.00 |
| 6 + | ₩137,800.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 311-3733
- 제조사 부품 번호:
- TS-01-20-1000
- 제조업체:
- Igus
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Igus | |
| Product Type | Linear Guide Rail | |
| Rail Width | 20mm | |
| Rail Length | 1mm | |
| Series | T | |
| Material | Hard Anodised Aluminium | |
| Static Load Rating | 7.4kN | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Igus | ||
Product Type Linear Guide Rail | ||
Rail Width 20mm | ||
Rail Length 1mm | ||
Series T | ||
Material Hard Anodised Aluminium | ||
Static Load Rating 7.4kN | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- DE
Igus DryLin W Series Bearing Block, 420N Static Load Rating, 140N Dynamic Load Rating - WJ200QM-01-06
This bearing block provides linear guidance for compact miniature rails in automation and electronics assemblies. It functions as a slider carriage designed to run along narrow-profile rails, offering controlled movement for small-scale positioning tasks in mechanical and electrical systems.
Features and Benefits:
• Static load capacity 420N delivers firm support under stationary loads
• Dynamic load rating 140N enables sustained motion with load handling
• Compatible with 4.5mm rail for compact track integration
• Carriage material die‑cast zinc offers structural rigidity and dimensional stability
• Slider footprint 19mm x 10mm supports space‑constrained mounts
• Dynamic load rating 140N enables sustained motion with load handling
• Compatible with 4.5mm rail for compact track integration
• Carriage material die‑cast zinc offers structural rigidity and dimensional stability
• Slider footprint 19mm x 10mm supports space‑constrained mounts
Applications
• Suitable for linear positioning in miniature actuator assemblies
• Ideal for PCB handling equipment requiring compact guidance
• Used with small pick‑and‑place heads in automation cells
• Can be used for camera or sensor linear stages in electronics testing
• Ideal for PCB handling equipment requiring compact guidance
• Used with small pick‑and‑place heads in automation cells
• Can be used for camera or sensor linear stages in electronics testing
What material considerations affect wear resistance during operation?
The carriage uses die‑cast zinc, which provides a hard contact surface that resists deformation and maintains alignment under repetitive sliding.
How does the block perform under continuous reciprocating motion?
With a dynamic load rating of 140 N, it sustains repeated movement while carrying moderate loads, balancing lifespan and operational smoothness.
Which rail width must be specified when selecting this block?
It is engineered for an acceptable rail width of 4.5 mm, so rails of that nominal width are required for correct engagement.
What static support can be expected when the carriage is stationary?
The unit sustains static loads up to 420 N, ensuring stable positioning when holding assemblies or fixtures without motion.
Note
Carriages and rails sold seperately.
관련된 링크들
- Igus T Series, TS-01-25-1000, Linear Guide Rail 23 mm width 1000 mm Length
- Igus T Series, TS-01-15-1000, Linear Guide Rail 15 mm width 1000 mm Length
- Igus T Series, TS-01-20-600, Linear Guide Rail 20 mm width 600 mm Length
- Igus T Series, TS-01-20-300, Linear Guide Rail 20 mm width 300 mm Length
- Igus T Series, TS-04-15-1000, Linear Guide Rail 15 mm width 1000 mm Length
- Igus T Series, TS-01-30-300, Linear Guide Rail 28 mm width 300 mm Length
- Igus T Series, TS-01-25-300, Linear Guide Rail 25 mm width 300 mm Length
- Igus T Series, TS-01-25-600, Linear Guide Rail 23 mm width 600 mm Length