Igus Linear Guide Carriage WW-10-40-10 DryLin W Series

모든 Linear Guide Blocks 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 unit)*

₩124,260.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 8월 24일 부터 54 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 5₩124,260.00
6 - 11₩119,300.00
12 +₩114,320.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
488-5136
제조사 부품 번호:
WW-10-40-10
제조업체:
Igus
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Igus

Product Type

Linear Guide Carriage

Series

DryLin W

Carriage Length

100mm

Carriage Width

73mm

Static Load Rating

4800N

Carriage Type

Linear

Carriage Material

Die Cast Zinc

Standards/Approvals

No

제외

COO (Country of Origin):
DE

Igus DryLin W Series Linear Guide Carriage, 100mm Carriage Length, 4800N Static Load Rating - WW-10-40-10


This linear guide carriage provides guided linear motion support for industrial machinery and automation equipment. Designed for sliding applications, it serves as a load-bearing carriage within rail systems where repeatable, guided travel is required. The unit combines a robust body material with a configuration suited to medium-high static loads.

Features and Benefits:


• Static load capacity 4800N delivers dependable support under stall conditions
• Die-cast zinc construction offers strength with moderate mass
• Carriage-type design enables smooth guided travel on linear rails
• 100mm carriage length accommodates compact mounting layouts
• 73mm carriage width provides stable load distribution across the bearing interface

Applications


• Suitable for automated pick-and-place systems in production lines
• Used for positioning modules in electrical panel assembly equipment
• Ideal for slide mechanisms in test and measurement rigs
• Can be used for motion stages in semiconductor handling machinery

What materials are used in the carriage body and why?


The body is manufactured from die-cast zinc, chosen for its structural rigidity and capacity to support load without requiring excessive cross-section, which helps when integrating into confined assemblies.

How should engineers assess compatibility with their linear rail system?


Check carriage footprint and mounting interface against the chosen rail

verify that the carriage-type configuration aligns with the rail's guidance method and that the static load rating exceeds expected peak stationary loads.

What performance limit is most relevant for stationary load scenarios?


The static load rating of 4800N is the primary value to use when evaluating the carriage's ability to withstand non-moving or jammed-load conditions without permanent deformation.

What aspects affect integration into control systems requiring precise positioning?


Mechanical stiffness from the die-cast zinc body and the carriage geometry influence repeatability

pair the carriage with suitable rail tolerances and guiding elements to achieve required positional accuracy.

관련된 링크들