Igus Linear Guide Carriage NW-02-40 DryLin N Series, 400 N Dynamic Load

모든 Linear Guide Blocks 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 unit)*

₩22,680.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 8월 03일 부터 513 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 5₩22,680.00
6 - 11₩21,840.00
12 +₩21,140.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
448-5411
제조사 부품 번호:
NW-02-40
제조업체:
Igus
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Igus

Series

DryLin N

Product Type

Linear Guide Carriage

Carriage Length

50mm

Carriage Width

23mm

Dynamic Load Rating

400N

Static Load Rating

700N

Carriage Type

Slider

Acceptable Rail Width

80mm

Standards/Approvals

DIN 7984, DIN 84, EN ISO 1707, DIN 6912

제외

COO (Country of Origin):
DE

Igus DryLin R Series Bearing, 16mm Inside Diameter, 26mm Outside Diameter - RJUM-01-16


This bearing is a closed-end linear bearing intended for guiding shafts in automation and mechanical assemblies. It combines a compact aluminium body with a design suited to linear motion applications where a sealed end and defined centreline offset are required. The component is designed for industry use where solid radial support and integration into linear systems are needed.

Features and Benefits:


• 10080N static capacity provides sustained support under high preload
• 1440N dynamic rating enables continuous motion loads
• 13mm base-to-bore centreline ensures consistent alignment
• Aluminium construction reduces mass for moving assemblies
• Closed-end design prevents shaft overtravel and ingress
• 36mm overall length allows compact carriage integration

Applications


• Suitable for linear guideways in pick-and-place units
• Ideal for actuator shafts in control panels and enclosures
• Used for supporting guide rods in conveyor modules
• Can be used for motion stages in test rigs
• Used with sliding elements in compact automation cells

What shaft size does it accept?


It accepts shafts with a 16mm internal bore to ensure a snug rotational fit.

How does the outside dimension affect mounting?


The 26mm external diameter determines bore size for housings and press-fit tolerances.

Is the end configuration suitable for particulate environments?


The closed-end configuration limits entry of debris from one end, reducing contamination risk at the shaft terminus.

What material properties influence thermal behaviour?


The aluminium body offers good thermal conductivity and low mass, affecting heat transfer and inertia in moving systems.

관련된 링크들