Ewellix Makers in Motion LBBR 3-C004 Bearing with 3 mm ID 7 mm OD 60 N 44 N
- RS 제품 번호:
- 390-6147
- 제조사 부품 번호:
- LBBR 3-C004
- 제조업체:
- Ewellix Makers in Motion
대량 구매 할인 기용 가능
Subtotal (1 Bag of 4 units)*
₩219,640.40
재고있음
- 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Bag(s) | Per Bag | 한팩당* |
|---|---|---|
| 1 - 5 | ₩219,640.40 | ₩54,911.04 |
| 6 - 11 | ₩210,860.80 | ₩52,715.20 |
| 12 + | ₩202,062.40 | ₩50,515.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 390-6147
- 제조사 부품 번호:
- LBBR 3-C004
- 제조업체:
- Ewellix Makers in Motion
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 7 mm | |
| Length | 10mm | |
| Inside Diameter | 3 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 60N | |
| Base to Bore Centerline | 3.5mm | |
| Closure Type | Closed | |
| Material | Steel | |
| Static Load Rating | 44N | |
| Standards/Approvals | No | |
| Series | LBBR | |
| 모두 선택 | ||
|---|---|---|
브랜드 Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 7 mm | ||
Length 10mm | ||
Inside Diameter 3 mm | ||
End Type Shielded | ||
Dynamic Load Rating 60N | ||
Base to Bore Centerline 3.5mm | ||
Closure Type Closed | ||
Material Steel | ||
Static Load Rating 44N | ||
Standards/Approvals No | ||
Series LBBR | ||
해당 안됨
- COO (Country of Origin):
- DE
LBBR Ball Bushings Without Seals - Closed
Conforms to Series 1 of ISO10285
Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
관련된 링크들
- Ewellix Makers in Motion LBBR 4-C004 Bearing with 4 mm ID 8 mm OD 75 N 60 N
- Ewellix Makers in Motion LBBR 5-C004 Bearing with 5 mm ID 10 mm OD 170 N 129 N
- Ewellix Makers in Motion LBBR 30 Bearing with 30 mm ID 40 mm OD 3150 N 2700 N
- Ewellix Makers in Motion LBBR8 Bearing with 8 mm ID 15 mm OD 490 N 355 N
- Ewellix Makers in Motion LBBR 20 Bearing with 20 mm ID 28 mm OD 1160 N 800 N
- Ewellix Makers in Motion LBBR 14 Bearing with 14 mm ID 21 mm OD 710 N 530 N
- Ewellix Makers in Motion LBBR 25 Bearing with 25 mm ID 35 mm OD 2120 N 1560 N
- Ewellix Makers in Motion LBBR 12 Bearing with 12 mm ID 19 mm OD 695 N 510 N