제조사부품번호

Igus RJUM-01-16 Bearing with 16 mm ID 26 mm OD 1440 N 10080 N

RS 제품 번호:: 311-3474
제조사 부품 번호:: RJUM-01-16
제조업체:: Igus

Igus RJUM-01-16 Bearing with 16 mm ID 26 mm OD 1440 N 10080 N

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩33,060.00

추가로 2026년 8월 24일 부터 130 개 단위 배송
추가로 2026년 8월 28일 부터 38 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 5	₩33,060.00
6 - 11	₩31,780.00
12 +	₩30,900.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 311-3474
제조사 부품 번호:: RJUM-01-16
제조업체:: Igus

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Igus
	Product Type	Bearing
	Length	36mm
	End Type	Closed
	Dynamic Load Rating	1440N
	Base to Bore Centerline	13mm
	Material	Aluminium
	Closure Type	Closed
	Static Load Rating	10080N
	Series	drylin R
	Standards/Approvals	No

	모두 선택
	브랜드 Igus
	Product Type Bearing
	Length 36mm
	End Type Closed
	Dynamic Load Rating 1440N
	Base to Bore Centerline 13mm
	Material Aluminium
	Closure Type Closed
	Static Load Rating 10080N
	Series drylin R
	Standards/Approvals No

Drylin Closed Bushing Data Sheet

COO (Country of Origin):: DE

Igus DryLin R Series Bearing, 16mm Inside Diameter, 26mm Outside Diameter - RJUM-01-16

This bearing is a closed-end linear bearing intended for guiding shafts in automation and mechanical assemblies. It combines a compact aluminium body with a design suited to linear motion applications where a sealed end and defined centreline offset are required. The component is designed for industry use where solid radial support and integration into linear systems are needed.

Features and Benefits:

• 10080N static capacity provides sustained support under high preload
• 1440N dynamic rating enables continuous motion loads
• 13mm base-to-bore centreline ensures consistent alignment
• Aluminium construction reduces mass for moving assemblies
• Closed-end design prevents shaft overtravel and ingress
• 36mm overall length allows compact carriage integration

Applications

• Suitable for linear guideways in pick-and-place units
• Ideal for actuator shafts in control panels and enclosures
• Used for supporting guide rods in conveyor modules
• Can be used for motion stages in test rigs
• Used with sliding elements in compact automation cells

What shaft size does it accept?

It accepts shafts with a 16mm internal bore to ensure a snug rotational fit.

How does the outside dimension affect mounting?

The 26mm external diameter determines bore size for housings and press-fit tolerances.

Is the end configuration suitable for particulate environments?

The closed-end configuration limits entry of debris from one end, reducing contamination risk at the shaft terminus.

What material properties influence thermal behaviour?

The aluminium body offers good thermal conductivity and low mass, affecting heat transfer and inertia in moving systems.