INA KH25-PP Bearing with 25 mm ID 35 mm OD 2420 N 2130 N

This bearing is a linear ball bearing designed for precise linear motion applications. With an inside diameter of 25mm and an outside diameter of 35mm, it provides an efficient fit for various components. The bearing is 40mm in length and features an open design with seals, ensuring protection against contaminants while maintaining performance.

• High dynamic load rating of 2420N enhances reliability

• Used for robotics for precise linear positioning

The dynamic load rating of 2420N and static load rating of 2130N are calculated based on the bearing's design, materials, and lubrication properties, ensuring it can support substantial forces in various applications.

The inclusion of seals protects the internal components from dust and debris, allowing for smoother operation and extending the service life, especially in environments where contamination is a concern.

Regular inspections for wear and checking for proper lubrication are recommended to maintain performance. Additionally, ensuring that the operating environment is clean can further prolong the bearing's longevity.

INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.;The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.;The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.

• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise

Due to the closed design, these linear bearings are suitable for use on shafts.

PP - Lip seals on both sides