제조사부품번호

STMicroelectronics Line Transceiver, Push Pull, 12-Pin VFDFPN

RS 제품 번호:: 163-7324
제조사 부품 번호:: L6362ATR
제조업체:: STMicroelectronics

STMicroelectronics Line Transceiver, Push Pull, 12-Pin VFDFPN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 reel of 3000 units)*

₩13,158,120.00

일시적 품절

2026년 10월 05일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 - 12000	₩4,386.04	₩13,157,556.00
15000 +	₩4,297.68	₩12,894,168.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 163-7324
제조사 부품 번호:: L6362ATR
제조업체:: STMicroelectronics

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Product Type	Line Transceiver
	IC Type	Line Transceiver IC
	Input Type	Single Ended
	Output Type	Push Pull
	Mount Type	Surface
	Package Type	VFDFPN
	Minimum Supply Voltage	7V
	Pin Count	12
	Maximum High Level Output Current	310mA
	Maximum Supply Voltage	36V
	Maximum Low Level Output Current	-310mA
	Minimum Operating Temperature	-40°C
	Maximum Propagation Delay Time @ CL	400ns
	Maximum Operating Temperature	125°C
	Width	3 mm
	Length	3mm
	Height	0.9mm
	Standards/Approvals	IEC 61000-4-4, EN60947-5-2, IEC 61000-4-2
	Series	L6362A
	Automotive Standard	No
	Supply Current	2.3mA

	모두 선택
	브랜드 STMicroelectronics
	Product Type Line Transceiver
	IC Type Line Transceiver IC
	Input Type Single Ended
	Output Type Push Pull
	Mount Type Surface
	Package Type VFDFPN
	Minimum Supply Voltage 7V
	Pin Count 12
	Maximum High Level Output Current 310mA
	Maximum Supply Voltage 36V
	Maximum Low Level Output Current -310mA
	Minimum Operating Temperature -40°C
	Maximum Propagation Delay Time @ CL 400ns
	Maximum Operating Temperature 125°C
	Width 3 mm
	Length 3mm
	Height 0.9mm
	Standards/Approvals IEC 61000-4-4, EN60947-5-2, IEC 61000-4-2
	Series L6362A
	Automotive Standard No
	Supply Current 2.3mA

The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment.

Fully protected

Reverse polarity

Overload with cut-off function

Overtemperature

Undervoltage and overvoltage

GND and VCC open wire

-40 to +125 °C operating ambient temperature

Selectable output stages:high-side, low-side, push-pull

Suitable to drive L, C and R loads

30 μF output load drive capability

Switching capability of inductors up to 500 mJ

Wake-up detection supported

Fast demagnetization of inductive loads

STMicroelectronics Line Transceiver, Push Pull, 12-Pin VFDFPN

관련된 링크들