Honeywell NGC Series Roller Plunger Limit Switch, 2 NC/2 NO, IP67, Metal Housing, 400V ac, 10A

RS 제품 번호:: 894-3371
Distrelec 제품 번호:: 301-53-046
제조사 부품 번호:: NGCMA50AX32L
제조업체:: Honeywell

Honeywell NGC Series Roller Plunger Limit Switch, 2 NC/2 NO, IP67, Metal Housing, 400V ac, 10A

Subtotal (1 unit)*

₩269,821.50

추가로 2026년 5월 25일 부터 100 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩269,821.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 894-3371
Distrelec 제품 번호:: 301-53-046
제조사 부품 번호:: NGCMA50AX32L
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP67
	Contact Configuration	2 NC/2 NO
	Housing Material	Metal
	Contact Type	Positive Break
	Switching Current	10A
	Terminal Type	Cable
	Series	NGC
	Switching AC Voltage	400V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	+75°C
	Length	30mm
	Width	16.7mm
	Depth	71.1mm
	Standards/Approvals	UL, RoHS, IEC, cUL, CE, CCC
	Hazardous Area Certification	No
	Operating Force	9.5N
	Mechanical Life	5000000Cycles
	Mounting Orientation	Panel

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP67
	Contact Configuration 2 NC/2 NO
	Housing Material Metal
	Contact Type Positive Break
	Switching Current 10A
	Terminal Type Cable
	Series NGC
	Switching AC Voltage 400V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature +75°C
	Length 30mm
	Width 16.7mm
	Depth 71.1mm
	Standards/Approvals UL, RoHS, IEC, cUL, CE, CCC
	Hazardous Area Certification No
	Operating Force 9.5N
	Mechanical Life 5000000Cycles
	Mounting Orientation Panel

COO (Country of Origin):: CN

Honeywell NGC Series Limit Switch, 10A Switching Current, IP67 - NGCMA50AX32L

This limit switch provides a Compact mechanical sensing solution for industrial control and automation, converting linear motion into electrical switching with a roller plunger actuator suited to panel mounting. It is intended for environments where precise end-of-travel detection and robustness are required, and connects via an integrated cable Terminal for straightforward wiring into control circuits.

Features and Benefits:

• Roller plunger actuator delivers reliable actuation with consistent travel
• Positive-break contact ensures clear circuit interruption during release
• 9.5N operating force gives predictable trigger thresholds for repeatable operation
• Rated switching current 10A at 400V supports moderate power loads
• IP67 ingress protection permits use in wet or dusty locations
• Mechanical life of 5 million cycles provides long service intervals

Applications

• Suitable for limit detection on industrial conveyor stops
• Ideal for position sensing on automated assembly fixtures
• Used with motor controllers for end-of-travel shutdown
• Can be used for safety interlocks in packaging machinery
• Used for feedback sensing in material handling equipment

What mounting orientation is required for installation?

It is designed for panel mounting and should be secured to a flat panel surface to ensure correct actuator alignment and reliable operation.

What are the environmental sealing capabilities when used outdoors or in washdown areas?

The device meets IP67 protection, offering full dust ingress prevention and temporary immersion resistance suitable for harsh indoor or occasional wet conditions.

Which approvals support its use in regulated installations?

The unit complies with multiple industry standards including UL, IEC, CE, cUL, RoHS and CCC approvals for broad international acceptance.

How does the housing contribute to durability in industrial settings?

The metal housing provides mechanical protection against impact and abrasion, preserving internal components under routine industrial stresses.