Honeywell SL1 Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 24V ac

RS 제품 번호:: 808-7689
제조사 부품 번호:: SL1-AK
제조업체:: Honeywell

Honeywell SL1 Series Roller Plunger Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 24V ac

Subtotal (1 unit)*

₩510,471.00

추가로 2026년 5월 25일 부터 16 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩510,471.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 808-7689
제조사 부품 번호:: SL1-AK
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Snap-In
	Series	SL1
	Switching DC Voltage	24V dc
	Switching AC Voltage	24V ac
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	70°C
	Width	59.8mm
	Depth	44.2mm
	Length	18mm
	Standards/Approvals	EN 60947-5-1, UL 508, CSA C22.2 No. 14, IEC 60947-5-1
	Hazardous Area Certification	No
	Operating Force	11.8N
	Mounting Orientation	Side
	Mechanical Life	20000000Operations
	Conduit Entry	PG13.5

	모두 선택
	브랜드 Honeywell
	Actuator Type Roller Plunger
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Snap-In
	Series SL1
	Switching DC Voltage 24V dc
	Switching AC Voltage 24V ac
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 70°C
	Width 59.8mm
	Depth 44.2mm
	Length 18mm
	Standards/Approvals EN 60947-5-1, UL 508, CSA C22.2 No. 14, IEC 60947-5-1
	Hazardous Area Certification No
	Operating Force 11.8N
	Mounting Orientation Side
	Mechanical Life 20000000Operations
	Conduit Entry PG13.5

Honeywell SL1 Series Limit Switch, Roller Plunger Actuator Type, Die Cast Zinc Housing - SL1-AK

This limit switch provides precise mechanical actuation for industrial control and safety interlocks, using a roller plunger actuator to detect linear motion and change electrical state. It is housed in a robust die-cast zinc enclosure with ingress protection suitable for harsh production environments, and employs a snap-action contact arrangement to deliver consistent switching behaviour at low voltages.

Features and Benefits:

• SPDT snap-action contacts deliver Rapid switching response and clear changeover
• IP67 enclosure ensures protection against dust ingress and temporary immersion
• 11.8 N operating force gives predictable actuation repeatability
• Mechanical life rated for 20,000,000 operations supports long duty cycles
• Operating range from −10 to 70 °C enables use across varied ambient conditions
• PG13.5 conduit entry provides a standard cable Interface for industrial wiring

Applications

• Suitable for position detection on automated assembly conveyors
• Ideal for end-of-travel switches on pneumatic actuators
• Used with motor control systems for safety interlock signalling
• Can be used for limit detection on packaging machinery
• Suitable for retrofit monitoring on industrial presses

How are electrical connections MADE to the device?

Terminals use a snap-in arrangement for secure, Compact wiring within control panels and enclosures.

What contact configuration is provided for integration with control logic?

A single-pole double-throw contact set supplies both normally open and normally closed paths for straightforward interfacing.

Which standards cover the device’s electrical and safety characteristics?

It meets recognised industrial switch standards covering electrical performance and operational testing.

Is the actuator orientation flexible for panel layout?

The unit is designed for side mounting to accommodate installation where lateral actuation is required.

Approvals

UL, CSA.