Telemecanique Sensors XCKJ Series Rod Limit Switch, 1 NO/1 NC, IP66, Zinc Alloy Housing, 240V ac, 3A

RS 제품 번호:: 700-4318
Distrelec 제품 번호:: 304-10-768
제조사 부품 번호:: XCKJ10559H29
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCKJ Series Rod Limit Switch, 1 NO/1 NC, IP66, Zinc Alloy Housing, 240V ac, 3A

Subtotal (1 unit)*

₩239,947.50

제한된 재고

7 개 단위 배송 준비 완료
추가로 2026년 6월 18일 부터 28 개 단위 배송
추가로 2026년 7월 23일 부터 14 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩239,947.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 700-4318
Distrelec 제품 번호:: 304-10-768
제조사 부품 번호:: XCKJ10559H29
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Rod
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66
	Housing Material	Zinc Alloy
	Contact Type	Snap Action
	Switching Current	3A
	Terminal Type	Screw
	Series	XCKJ
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	40mm
	Standards/Approvals	CCC, CSA, EN 60204-1, IEC 60204-1, UL
	Length	77mm
	Depth	44mm
	Hazardous Area Certification	No
	Mechanical Life	30000000Cycles
	Conduit Entry	M20
	Operating Force	0.25Nm
	Mounting Orientation	Multi Directional

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Rod
	Contact Configuration 1 NO/1 NC
	IP Rating IP66
	Housing Material Zinc Alloy
	Contact Type Snap Action
	Switching Current 3A
	Terminal Type Screw
	Series XCKJ
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 40mm
	Standards/Approvals CCC, CSA, EN 60204-1, IEC 60204-1, UL
	Length 77mm
	Depth 44mm
	Hazardous Area Certification No
	Mechanical Life 30000000Cycles
	Conduit Entry M20
	Operating Force 0.25Nm
	Mounting Orientation Multi Directional

COO (Country of Origin):: ID

Telemecanique Sensors XCKJ Series Limit Switch, 1 NO/1 NC Contact Configuration, IP66 Rating - XCKJ10559H29

This limit switch provides mechanical position sensing for industrial automation and control systems, using a rod actuator to detect movement and trigger control circuits. It is housed in a corrosion-resistant zamak enclosure with a high-level ingress protection rating suitable for demanding environments. The device employs snap-action contacts to perform Rapid make-or-break switching for control and safety interfaces.

Features and Benefits:

• 1NO1NC contact arrangement offers flexible switching logic • Snap-action contacts deliver fast, positive state changes • IP66 protection enables use in dusty or water-exposed locations • Rated for 240V AC switching to Interface with standard control supplies • 3A carrying capacity supports modest load switching at 250V DC • Mechanical life of 30,000,000 cycles ensures extended operational service

Applications

• Suitable for conveyor end-of-travel detection in factories • Ideal for door position sensing on industrial enclosures • Used for machine tool limit detection in production lines • Can be used for safety interlocks in material-handling equipment

What conduit connection is provided for electrical entry?

The unit accepts an M20 conduit entry, enabling standard threaded conduit or cable gland installations.

What Terminal type is used for field wiring?

Screw-clamp terminals are provided for secure conductor attachment and straightforward maintenance.

Which mounting orientations are possible for installation?

The design supports multi-directional mounting to accommodate varied machine geometries.

What temperature range is suitable for reliable operation?

It operates between -25°C and 70°C, covering common industrial ambient conditions.

What is the actuator torque or force requirement for operation?

The rod actuator requires an operating force equivalent to 0.25 Nm to change contact state.

Approvals

UL; CSA