Honeywell BZ Series Pin Plunger Limit Switch, SPDT, General Purpose Phenolic Housing, 250V ac, 25A

RS 제품 번호:: 691-7229
제조사 부품 번호:: BZ-R-A2
제조업체:: Honeywell

Honeywell BZ Series Pin Plunger Limit Switch, SPDT, General Purpose Phenolic Housing, 250V ac, 25A

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩31,551.00

추가로 2026년 5월 25일 부터 502 개 단위 배송
추가로 2026년 6월 01일 부터 78 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩31,551.00
5 +	₩29,971.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 691-7229
제조사 부품 번호:: BZ-R-A2
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Pin Plunger
	Contact Configuration	SPDT
	Housing Material	General Purpose Phenolic
	Contact Type	Snap Action
	Switching Current	25A
	Terminal Type	Screw
	Series	BZ
	Minimum Operating Temperature	-55°C
	Switching AC Voltage	250V ac
	Maximum Operating Temperature	85°C
	Standards/Approvals	RoHS
	Width	1.94in
	Depth	0.68in
	Length	24.13mm
	Hazardous Area Certification	No
	Mechanical Life	20000000Cycles
	Operating Force	2.5N
	Conduit Entry	20 mm
	Mounting Orientation	Side

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Pin Plunger
	Contact Configuration SPDT
	Housing Material General Purpose Phenolic
	Contact Type Snap Action
	Switching Current 25A
	Terminal Type Screw
	Series BZ
	Minimum Operating Temperature -55°C
	Switching AC Voltage 250V ac
	Maximum Operating Temperature 85°C
	Standards/Approvals RoHS
	Width 1.94in
	Depth 0.68in
	Length 24.13mm
	Hazardous Area Certification No
	Mechanical Life 20000000Cycles
	Operating Force 2.5N
	Conduit Entry 20 mm
	Mounting Orientation Side

COO (Country of Origin):: MX

Honeywell Series BZ Limit Switch, 20mm Conduit Entry, 25A Switching Current - BZ-R-A2

This limit switch is a Compact electromechanical device designed to detect position changes and control circuits in industrial settings. It operates as a plunger-actuated switch suitable for side mounting and provides a single-pole, double-throw switching arrangement for straightforward control logic. The unit is housed in a plastic enclosure and is intended for use where a robust snap-action contact and simple screw-terminal connection are required.

Features and Benefits:

• SPDT snap-action contact for fast, positive switching
• Rated for 250V AC and 25A to handle mains-level loads
• Mechanical life of 20 million cycles for extended service intervals
• Operates between -55°C and 85°C for wide thermal range use
• 20mm conduit entry enabling standard cable gland fittings

Applications

• Suitable for position sensing on conveyor stops and Gates
• Ideal for actuator limit detection in pneumatic systems
• Used with motor control panels to signal end-of-travel conditions
• Can be used for safety interlocks on machinery doors
• Suitable for retrofit in legacy automation assemblies requiring screw terminals

What Terminal connection method is provided for field wiring?

The switch uses screw terminals to secure incoming conductors and simplify installation without specialised tools.

How is the unit mounted in machinery?

It is designed for side mounting which allows the plunger actuator to be engaged from lateral movement axes.

What ingress provision exists for cable entry?

A 20mm conduit entry accommodates standard conduit glands or threaded cable entries for protected cable routing.

How does the contact action affect control responsiveness?

The snap-action contact provides a Rapid changeover, reducing contact bounce and improving repeatable electrical signalling.