Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP68, IP66, IP67, Zinc Alloy Housing, 240V ac,

RS 제품 번호:: 447-3840
Distrelec 제품 번호:: 303-99-942
제조사 부품 번호:: XCMD2102L1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP68, IP66, IP67, Zinc Alloy Housing, 240V ac,

Subtotal (1 unit)*

₩127,062.00

제한된 재고

221 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩127,062.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 447-3840
Distrelec 제품 번호:: 303-99-942
제조사 부품 번호:: XCMD2102L1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP68, IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Zinc Alloy
	Contact Type	Snap Action
	Switching Current	1.5A
	Terminal Type	Cable
	Series	XCMD
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Length	50mm
	Width	30mm
	Standards/Approvals	CCC, CSA, REACH, RoHS, UL
	Depth	16mm
	Hazardous Area Certification	No
	Operating Force	7N
	Mechanical Life	10000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP68, IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Zinc Alloy
	Contact Type Snap Action
	Switching Current 1.5A
	Terminal Type Cable
	Series XCMD
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Length 50mm
	Width 30mm
	Standards/Approvals CCC, CSA, REACH, RoHS, UL
	Depth 16mm
	Hazardous Area Certification No
	Operating Force 7N
	Mechanical Life 10000000Cycles

COO (Country of Origin):: ID

Telemecanique Sensors XCMD Series Limit Switch, Roller Plunger Actuator, IP68 - XCMD2102L1

This limit switch provides precise mechanical position sensing for industrial control systems. It operates via a roller plunger actuator and is designed for use where snap-action switching is required in automation, electrical and mechanical assemblies. The device connects through a cable Terminal and is suited to environments requiring robust sealing and dependable switching behaviour.

Features and Benefits:

• Snap-action contacts deliver fast switching at 240V AC 1.5 A
• Dual contact arrangement gives one NO and one NC contact
• Wide temperature range supports -25°C to 70°C operation
• High-cycle durability rated for 10,000,000 cycles
• Low actuation force of 7N reduces wear on mechanisms
• IP66, IP67 and IP68 ingress protection for harsh conditions

Applications

• Suitable for conveyor end-of-travel detection
• Ideal for limit sensing on industrial presses
• Used with automated Gates and barriers
• Can be used for position feedback in packaging machines
• Suitable for safety interlocks in electrical panels

What material protects the switch body from mechanical damage?

The housing is MADE from zamak, providing a corrosion-resistant metal enclosure that balances strength and manufacturability.

How is the device electrically connected within control systems?

It uses a cable Terminal with an M12 conduit entry allowing straightforward wiring to controllers and junction boxes.

What certification standards does it meet for regulatory acceptance?

It is approved to CCC, CSA, REACH, RoHS and UL standards, supporting use in regulated installations.

How does the contact mechanism behave under load?

The snap-action contact type provides decisive, low-bounce transitions suited to switching AC and DC loads up to the rated voltages and currents.