Telemecanique Sensors ZCD Series Limit Switch Body, 1 NO/1 NC, IP66, IP67, Zamak Housing, 240V ac, 1.5A

RS 제품 번호:: 447-3604
Distrelec 제품 번호:: 301-12-126
제조사 부품 번호:: ZCD21
제조업체:: Telemecanique Sensors

Telemecanique Sensors ZCD Series Limit Switch Body, 1 NO/1 NC, IP66, IP67, Zamak Housing, 240V ac, 1.5A

Subtotal (1 unit)*

₩80,520.00

제한된 재고

62 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩80,520.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 447-3604
Distrelec 제품 번호:: 301-12-126
제조사 부품 번호:: ZCD21
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch Body
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Zamak
	Contact Type	Snap Action
	Terminal Type	Screw Clamp
	Switching Current	1.5A
	Series	ZCD
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Depth	30mm
	Width	31mm
	Length	65mm
	Standards/Approvals	RoHS, REACH, IEC, EN
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch Body
	IP Rating IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Zamak
	Contact Type Snap Action
	Terminal Type Screw Clamp
	Switching Current 1.5A
	Series ZCD
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Depth 30mm
	Width 31mm
	Length 65mm
	Standards/Approvals RoHS, REACH, IEC, EN
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles

COO (Country of Origin):: ID

Telemecanique Sensors ZCD Series Limit Switch Body, IP66/IP67, 1 NO/1 NC Contact Configuration - ZCD21

This limit switch body is a Compact industrial switching enclosure designed to house a snap-action switching mechanism for position detection in control systems. It is intended for use in automation and electrical installations where a robust, sealed switch body is required, and operates across a typical industrial temperature range.

Features and Benefits:

• Zamak housing offers robust corrosion resistance and durability • IP66 and IP67 protection enables reliable washdown and immersion use • 5,000,000 cycle mechanical life supports long-term repetitive operation • Screw clamp terminals permit secure, vibration-resistant wiring connections • Snap-action contacts deliver fast transition for accurate detection • Operates from -25°C to 70°C for wide environmental compatibility

Applications

• Suitable for machine end-of-travel detection in automated conveyors • Ideal for position sensing on industrial valves and actuators • Used with control panels requiring Compact sealed switch bodies • Can be used for safety interlocks on production equipment • Suitable for outdoor enclosures exposed to washdown or rain

What contact arrangement is provided and how does it affect wiring?

It provides one normally open and one normally closed contact, allowing both make and break signalling from a single actuator connection.

What electrical loads can it switch in AC and DC circuits?

It is rated to switch up to 240V AC at 1.5A and up to 250V DC for compatible low-current control circuits.

How does the Terminal design aid installation in confined panels?

The screw clamp terminals allow straightforward conductor insertion and secure clamping without specialised ferrules, simplifying field wiring in tight spaces.

Which standards does it conform to for material and safety considerations?

It meets RoHS and REACH substance requirements and is built to recognised IEC and EN norms for switch components.