Honeywell SSCE Series Plunger Limit Switch, SPDT, IP68, Die Cast Zinc Housing, 600V ac, 6A

RS 제품 번호:: 344-3589
Distrelec 제품 번호:: 136-30-209
제조사 부품 번호:: SSCEB31B
제조업체:: Honeywell

Honeywell SSCE Series Plunger Limit Switch, SPDT, IP68, Die Cast Zinc Housing, 600V ac, 6A

Subtotal (1 unit)*

₩372,196.50

추가로 2026년 6월 15일 부터 113 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩372,196.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 344-3589
Distrelec 제품 번호:: 136-30-209
제조사 부품 번호:: SSCEB31B
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	IP Rating	IP68
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	6A
	Series	SSCE
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	90°C
	Length	54mm
	Depth	16mm
	Width	40mm
	Standards/Approvals	CE, CSA, UL
	Hazardous Area Certification	No
	Conduit Entry	M12
	Mechanical Life	10000000Cycles
	Mounting Orientation	Top
	Operating Force	11.8Nm

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	IP Rating IP68
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 6A
	Series SSCE
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 90°C
	Length 54mm
	Depth 16mm
	Width 40mm
	Standards/Approvals CE, CSA, UL
	Hazardous Area Certification No
	Conduit Entry M12
	Mechanical Life 10000000Cycles
	Mounting Orientation Top
	Operating Force 11.8Nm

COO (Country of Origin):: GB

Honeywell SSCE Series Limit Switch, IP68, Die Cast Zinc Housing - SSCEB31B

This limit switch is a Compact electromechanical device designed to detect physical movement and provide a discrete electrical output in industrial control systems. It features a top-mounted plunger actuator housed in a die-cast zinc enclosure with ingress protection that permits use in wet or dusty environments. The switch is suited to monitoring linear motion and end-of-travel positions where a robust, sealed sensor is required.

Features and Benefits:

• SPDT snap-action contact for clear single-pole switching performance
• Rated for 600V AC switching to handle high-voltage circuits
• Switching current capability of 6A enabling moderate-load control
• IP68 enclosure for long-term protection against dust and immersion
• Mechanical endurance of 10,000,000 cycles for extended service life
• Operating range from -40°C to 90°C for wide temperature tolerance

Applications

• Suitable for position detection on automated conveyors
• Ideal for actuation feedback in industrial valves and dampers
• Used with motor drives as travel end-stop sensing
• Can be used for safety interlocks in outdoor control cabinets
• Used for machine tool limit detection in harsh environments

How is the electrical connection provided?

A cable Terminal is fitted to the unit, allowing direct wiring without separate Terminal blocks.

What type of actuator motion does it respond to?

The device uses a plunger-style actuator that responds to linear contact forces applied axially to the top-mounted plunger.

Which approvals verify suitability for regulated installations?

It holds CE, CSA and UL recognitions indicating conformity with multiple regional standards.

What material contributes to its impact resistance?

The enclosure is formed from die-cast zinc, providing structural durability and shielding for internal components.

How is mounting orientation handled for installation?

It is designed for TOP mounting, allowing installers to position the actuator above the switch body for direct engagement.

Approvals

UL, CSA.