Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A

RS 제품 번호:: 217-7103
Distrelec 제품 번호:: 304-22-790
제조사 부품 번호:: 14CE1-Q
제조업체:: Honeywell

Honeywell 14CE Series Plunger Limit Switch, SPDT, IP66, IP65, IP67, IP68, Die Cast Zinc Housing, 250V, 5A

Subtotal (1 unit)*

₩348,153.00

추가로 2026년 5월 25일 부터 26 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩348,153.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 217-7103
Distrelec 제품 번호:: 304-22-790
제조사 부품 번호:: 14CE1-Q
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	IP Rating	IP66, IP65, IP67, IP68
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	5A
	Series	14CE
	Switching DC Voltage	28V
	Switching AC Voltage	250V
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	70°C
	Depth	44mm
	Length	16mm
	Width	44mm
	Standards/Approvals	CE, EN 60947-5-1
	Hazardous Area Certification	No
	Operating Force	11.8N
	Mounting Orientation	Side
	Mechanical Life	10000000Cycles
	Conduit Entry	20 mm

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	IP Rating IP66, IP65, IP67, IP68
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 5A
	Series 14CE
	Switching DC Voltage 28V
	Switching AC Voltage 250V
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 70°C
	Depth 44mm
	Length 16mm
	Width 44mm
	Standards/Approvals CE, EN 60947-5-1
	Hazardous Area Certification No
	Operating Force 11.8N
	Mounting Orientation Side
	Mechanical Life 10000000Cycles
	Conduit Entry 20 mm

Honeywell 14CE Series Limit Switch, 20mm Conduit Entry, Top Pin Plunger Actuator Type - 14CE1-Q

This limit switch is a compact, mechanically actuated device designed to detect position changes and provide reliable switching in industrial control systems. It is intended for gang mounting and offers snap-action contact operation with a top-mounted plunger actuator, suitable for environments requiring robust enclosure protection and routine switching of electrical loads.

Features and Benefits:

• Die-cast zinc housing delivers resilient enclosure protection
• SPDT contacts enable changeover switching for control circuits
• Snap-action contact mechanism ensures swift state transition
• IP66, IP65, IP67, IP68 ratings permit use in harsh environments
• Mechanical life rated at 10 million cycles supports long service intervals
• Operating force of 11.8 N provides consistent actuation response

Applications

• Suitable for conveyor end-of-travel detection in automation lines
• Ideal for limit sensing on material handling equipment
• Used for position feedback on industrial actuators and valves
• Can be used for safety interlocks in electrical cabinets
• Used with remote equipment where cable termination is required

What electrical loads can it handle?

It switches AC loads up to 250V at 5A and DC loads up to 28 V, using a snap-action contact design suitable for typical control and signalling circuits.

How is the unit connected on-site?

Termination is via cable entry using a 20mm conduit interface, allowing straightforward field cabling and gland installation.

What temperature range is supported during operation?

The switch is designed to operate between 0 °C and 70 °C, accommodating common industrial ambient conditions.

Are there recognised standards applicable to its safety and performance?

It complies with EN 60947-5-1 and carries the CE designation, reflecting conformance to relevant European switch performance requirements.