Telemecanique Sensors XCKN Series Roller Lever Limit Switch, DP, IP65, Plastic Housing, 240V ac, 10A

RS 제품 번호:: 125-8461
Distrelec 제품 번호:: 303-97-205
제조사 부품 번호:: XCKN2118P20
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCKN Series Roller Lever Limit Switch, DP, IP65, Plastic Housing, 240V ac, 10A

Subtotal (1 unit)*

₩44,655.00

215 개 단위 배송 준비 완료
추가로 2026년 7월 09일 부터 160 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩44,655.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 125-8461
Distrelec 제품 번호:: 303-97-205
제조사 부품 번호:: XCKN2118P20
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	DP
	IP Rating	IP65
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	M20
	Switching Current	10A
	Series	XCKN
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	CSA, IEC, UL
	Length	30mm
	Depth	108mm
	Width	44.5mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Operating Force	0.1Nm
	Conduit Entry	1 Cable Gland x M20 x 1.5

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration DP
	IP Rating IP65
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type M20
	Switching Current 10A
	Series XCKN
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals CSA, IEC, UL
	Length 30mm
	Depth 108mm
	Width 44.5mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Operating Force 0.1Nm
	Conduit Entry 1 Cable Gland x M20 x 1.5

Telemecanique Sensors XCKN Series Limit Switch, IP65, 10A Switching Current - XCKN2118P20

This limit switch provides precise mechanical position sensing for industrial control systems, using a roller lever actuator to detect movement and trigger circuit changes. Designed for routine use in automation and machinery control, it delivers snap-action switching performance with a plastic enclosure rated for protected environments.

Features and Benefits:

• Snap-action contacts deliver Rapid make/break switching response • 1NO/1NC contact arrangement supports versatile control logic • 10A switching current enables direct control of many loads • IP65 enclosure protects against dust and water jets • Low operating torque of 0.1Nm reduces actuation wear • Mechanical endurance of 10000000 cycles supports long service life

Applications

• Suitable for conveyor end-of-travel detection • Ideal for machine-tool limit sensing in production lines • Used with motor starters for position interlocking • Can be used for safety interlocks in assembly cells • Used for gate and hatch position monitoring

What temperature range can it operate within?

It functions reliably between -25°C and 70°C for typical industrial ambient conditions.

How are electrical connections MADE to the device?

Wiring is secured via screw-clamp terminals and routed through an M20x1.5 cable gland.

What approvals support its use in regulated installations?

It carries CSA, IEC and UL recognitions indicating adherence to established standards.

How does the contact switching performance suit DC applications?

The contacts are rated for switching up to 250V DC at specified currents for DC control circuits.

What materials and ingress protection apply to the enclosure?

The housing is manufactured from plastic and is certified to IP65 for protection against dust ingress and low-pressure water jets.