Telemecanique Sensors OsiSense XC Series Plunger Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 240V ac, 3A

RS 제품 번호:: 235-975
Distrelec 제품 번호:: 304-10-770
제조사 부품 번호:: XCKM110H29
제조업체:: Telemecanique Sensors

Telemecanique Sensors OsiSense XC Series Plunger Limit Switch, 1 NO/1 NC, IP66, Zamak Housing, 240V ac, 3A

Subtotal (1 unit)*

₩169,240.00

제한된 재고

48 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩169,240.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 235-975
Distrelec 제품 번호:: 304-10-770
제조사 부품 번호:: XCKM110H29
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66
	Housing Material	Zamak
	Contact Type	Snap Action
	Terminal Type	Screw Clamp
	Switching Current	3A
	Series	OsiSense XC
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	64mm
	Length	64mm
	Depth	30mm
	Standards/Approvals	CSA, IEC, REACH, RoHS, UL, CCC
	Hazardous Area Certification	No
	Operating Force	45N
	Mechanical Life	20000000Cycles
	Conduit Entry	M20

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP66
	Housing Material Zamak
	Contact Type Snap Action
	Terminal Type Screw Clamp
	Switching Current 3A
	Series OsiSense XC
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 64mm
	Length 64mm
	Depth 30mm
	Standards/Approvals CSA, IEC, REACH, RoHS, UL, CCC
	Hazardous Area Certification No
	Operating Force 45N
	Mechanical Life 20000000Cycles
	Conduit Entry M20

COO (Country of Origin):: ID

Telemecanique Sensors Osizense XC Series Limit Switch, IP66, 45N Operating Force - XCKM110H29

This limit switch is a Compact electromechanical device used to detect mechanical movement and provide discrete electrical switching in industrial control systems. It is designed for use where robust position sensing is required, delivering snap-action contacts and a plunger actuator for direct mechanical engagement. The unit is intended for control panels, machinery safety circuits and automation feedback tasks in demanding industrial environments.

Features and Benefits:

• Snap-action contacts provide fast, decisive switching at actuation
• 45N operating force ensures consistent actuation under load
• 1NO/1NC contact arrangement supports dual control logic
• 250VDC switching capability allows use in DC control circuits
• 3A switching current suits moderate control and signalling loads
• 20,000,000-cycle mechanical life minimises replacement frequency

Applications

• Suitable for end-of-travel detection on conveyors and actuators
• Ideal for safety interlocks on guarding and access panels
• Used with motor starters for position-based control logic
• Can be used for batch counters and move/stop sensing in machinery

What environmental protection does it offer for dusty or wet areas?

The enclosure is rated to IP66, providing dust-tight protection and resistance to powerful water jets.

What material is the housing and why does that matter?

The body is MADE from zamak, which delivers Durable corrosion-resistant support for industrial mounting.

How is the switch wired into control systems?

Terminals use screw-clamp connections to secure conductors for reliable electrical contact.

What temperature range can it operate within?

It functions across temperatures from -25°C up to 70°C for a wide range of ambient conditions.

What conduit entry is provided for cable routing?

A single M20 entry accommodates standard conduit fittings for cable protection and strain relief.

Approvals

UL, CSA

Standards

VDE0660, IEC947-5-1