Telemecanique Sensors XCMH Series Roller Lever Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

RS 제품 번호:: 194-145
제조사 부품 번호:: XCMH2115L1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Lever Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

Subtotal (1 unit)*

₩82,180.00

추가로 2026년 8월 17일 부터 38 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩82,180.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-145
제조사 부품 번호:: XCMH2115L1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Length	16mm
	Standards/Approvals	UL 508, CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1
	Depth	94mm
	Width	30mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	0.5N

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Length 16mm
	Standards/Approvals UL 508, CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1
	Depth 94mm
	Width 30mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 0.5N

Datasheet - XCMH2115L1

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/ IP67 Ingress Protection, 0.5N Operating Force - XCMH2115L1

This limit switch provides a compact, electromechanical solution for detecting position and end-of-travel in industrial machinery. It uses a roller lever actuator and a snap-action contact arrangement to deliver rapid electrical changeover for control circuits. The device is intended for use where sealed protection and straightforward wiring are required.

Features and Benefits:

• Snap-action contacts reduce contact bounce for accurate switching
• 0.5N actuation force allows sensitive mechanical response
• Rated for 250V DC and 240V AC to suit diverse control voltages
• 0.75A switching current supports low-power signalling loads
• Durable for 5,000,000 cycles to lower maintenance intervals
• Cable termination simplifies installation in confined spaces

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for gating mechanisms requiring sensitive actuation
• Used with packaging equipment for product-present sensing
• Can be used for limit detection on automated feeders
• Suitable for positioning verification in material-handling systems

What environmental protection does it provide for washdown or dust?

The enclosure meets IP66 and IP67 ratings, offering dust-tight sealing and protection against powerful water jets and temporary immersion.

How does the contact configuration support control logic?

It offers one normally open and one normally closed contact arranged for instantaneous changeover, enabling both make and break signalling in safety or control circuits.

What materials and temperature range are appropriate for installation?

The switch uses a plastic enclosure and operates between -25°C and 70°C, allowing use in many standard indoor and sheltered outdoor industrial settings.

Which standards does it conform to for electrical safety and machinery use?

Certification covers UL 508, CSA C22.2 No 14, IEC 60204-1 and IEC 60947-5-1 to align with recognised industrial electrical requirements.