SICK C2MT Series Light Curtain Receiver, Sender, 34 mm Resolution

모든 Light Curtains 열람하기

Subtotal (1 unit)*

₩954,912.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 12월 02일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩954,912.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
701-2940
Distrelec 제품 번호:
304-23-271
제조사 부품 번호:
C2MT-03034BBC03DE0
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Light Curtain

Series

C2MT

Beam Resolution

34mm

Component Type

Receiver, Sender

Safety Type

Type 2

Standards/Approvals

ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus

Protective Height

300mm

Maximum Protective Width

8m

Maximum Supply Voltage

24V dc

Minimum Scanning Distance

0μm

Maximum Scanning Distance

8m

Maximum Response Time

13ms

Width

15mm

Length

32mm

Height

300mm

Terminal Type

5-Pin M12

COO (Country of Origin):
DE

SICK C2MT Series Light Curtain, 300mm Protective Height, 8m Maximum Scanning distance - C2MT-03034BBC03DE0


This light curtain receiver Type 2 300mm is a Compact safety sensor designed for safeguarding machine access points in industrial automation. It operates as a standalone unit or as the last device in cascaded systems, providing optical synchronisation without separate wiring. The device is suited to environments requiring short-range presence detection and integrates with hard-wired control architectures using a 5-pin M12 connection.

Features and Benefits:


• 13 MS response time improves reaction for machinery safety
• 34mm beam resolution detects objects with defined granularity
• 24V DC supply enables seamless integration with control systeMS
• 58 internal tests per second increases fault detection frequency
• IP65 enclosure rating permits use in dusty and damp areas

Applications


• Suitable for guarding machine access openings on production lines
• Ideal for integration with safety relays in control cabinets
• Used with cascaded light curtain networks for extended coverage
• Can be used for presence detection at robot cell perimeters

What are the electrical connection requirements?


It uses a 5-pin M12 plug with a 350mm cable and accepts 24V DC supply within 19.2V to 28.8V.

How does the device behave when a fault occurs?


The safe state sets at least one OSSD to OFF to terminate hazardous outputs.

What environmental conditions can it tolerate?


It operates from -20°C to +55°C, stores between -25°C and +70°C, and resists humidity of 15% to 95% non‑condensing.

Which certifications cover suitability for regulatory and export needs?


It holds EC-Type-Examination, UKCA, RoHS, cULus and various national conformity declarations.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978

관련된 링크들