SICK C2MT Series Light Curtain Receiver, Sender, 24 mm Resolution

모든 Light Curtains 열람하기

Subtotal (1 unit)*

₩1,160,260.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 19일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,160,260.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
701-2937
제조사 부품 번호:
C2MT-06024BBC04FE0
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Light Curtain

Series

C2MT

Beam Resolution

24mm

Component Type

Receiver, Sender

Safety Type

Type 2

Standards/Approvals

ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus

Protective Height

600mm

Maximum Protective Width

8m

Maximum Supply Voltage

24V dc

Minimum Scanning Distance

0μm

Maximum Scanning Distance

8m

Height

600mm

Maximum Response Time

13ms

Length

32mm

Width

15mm

Terminal Type

5-Pin M12

COO (Country of Origin):
DE

SICK C2MT Series Light Curtain, 600mm Protective Height, 24V DC Supply Voltage - C2MT-06024BBC04FE0


This light curtain provides non-contact presence detection for machine safeguarding and access protection in industrial environments. It operates as a receiver in a twin-stick configuration with optical synchronisation and is supplied with mounting brackets, a system plug and a test rod. The device functions as a standalone safety sensor with built-in LEDs for status indication and hard-wired configuration for straightforward integration into safety circuits.

Features and Benefits:


• 13ms maximum response time ensuring Rapid hazard detection
• 24mm beam resolution reducing undetected intrusion risk
• 8m maximum protective width enabling wide-area coverage
• Type2 safety classification supporting category 2 system designs
• M12 5-pin Terminal for simple 24V DC connection

Applications


• Suitable for safeguarding moving machine guards and doors
• Used with production lines requiring short detection distances
• Ideal for integration into safety relay control architectures
• Suitable for packaging machinery access protection
• Used for perimeter protection on material handling systems

What electrical connection does it use?


It connects via a 5-pin M12 plug and operates from 24V DC.

How is synchronisation achieved between sticks?


Synchronisation is optical and does not require separate wiring.

What environmental conditions can it withstand?


It has IP65 protection, operates between -20°C and +55°C and tolerates 15%-95% non-condensing humidity.

What fault behaviour is provided on failure?


In the event of a fault at least one OSSD is switched to the OFF state.

What mechanical form factor should be considered for mounting?


The housing measures 15mm x 32mm cross-section and includes O-fix brackets for installation.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978

관련된 링크들