SICK C2MT Series Light Curtain Receiver, Sender, 24 mm Resolution

모든 Light Curtains 열람하기

Subtotal (1 unit)*

₩1,535,274.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 12월 25일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,535,274.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
701-2930
제조사 부품 번호:
C2MT-07824BBC03FB0
제조업체:
SICK
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SICK

Product Type

Light Curtain

Series

C2MT

Beam Resolution

24mm

Component Type

Receiver, Sender

Safety Type

Type 2

Standards/Approvals

ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus

Protective Height

780mm

Maximum Protective Width

8m

Maximum Supply Voltage

24V dc

Minimum Scanning Distance

0μm

Maximum Scanning Distance

8m

Height

780mm

Length

32mm

Width

15mm

Maximum Response Time

13ms

Terminal Type

5-Pin M12

COO (Country of Origin):
DE

SICK C2MT Series Light Curtain, 780mm Protective Height, 8m Maximum Scanning Distance - C2MT-07824BBC03FB0


This light curtain receiver provides protective presence sensing for industrial access and safeguarding tasks. Designed for standalone operation with optical synchronisation and twin-stick delivery, it operates from a 24V DC supply and is suited to environments requiring compact, non-intrusive safety sensing. The device includes system plugs and mounting brackets for Rapid installation and is specified for continuous monitoring roles where a defined protective field height and response performance are required.

Features and Benefits:


• 13ms response time for Rapid hazard detection
• 24mm beam resolution for precise object recognition
• 24V DC supply operation for standard industrial power rails
• Optical synchronisation without separate cabling for simplified set-up
• PNP short-circuit protected outputs for safe switching

Applications


• Suitable for safeguarding machine access openings on production lines
• Ideal for integration with safety relay controls and EDM systems
• Used with automated cells requiring Compact presence detection
• Can be used for perimeter protection where 780mm coverage is required

What connection method does the device use?


It uses a hard-wired system connection via a 5-pin M12 plug with a 700mm cable.

How does the unit behave if a fault occurs?


The safe state is entered by at least one OSSD switching to the OFF condition.

What environmental limits apply to operation?


It operates between -20°C and +55°C with IP65 enclosure protection.

How is the device synchronised in multi-stick setups?


Synchronisation is optical and does not require a separate synchronisation line.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978

관련된 링크들