Banner Mounting Bracket for use with VALU-BEAM 915 Series Sensor, 132 mm, 56 mm Width
- RS 제품 번호:
- 832-0062
- 제조사 부품 번호:
- BRT-100X55A
- 제조업체:
- Banner
Subtotal (1 unit)*
₩25,098.00
재고있음
- 50 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩25,098.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 832-0062
- 제조사 부품 번호:
- BRT-100X55A
- 제조업체:
- Banner
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Banner | |
| For Use With | VALU-BEAM 915 Series Sensor | |
| Product Type | Mounting Bracket | |
| Width | 56 mm | |
| Material | Acrylic | |
| Standards/Approvals | No | |
| Length | 132mm | |
| Series | BRT | |
| 모두 선택 | ||
|---|---|---|
브랜드 Banner | ||
For Use With VALU-BEAM 915 Series Sensor | ||
Product Type Mounting Bracket | ||
Width 56 mm | ||
Material Acrylic | ||
Standards/Approvals No | ||
Length 132mm | ||
Series BRT | ||
- COO (Country of Origin):
- DE
Banner Reflector, For Photoelectric Sensor, 100 (W) x 55mm (H) Reflective Dimensions - BRT Series - BRT-100X55A
Finish building your automated sorting system with this reflector from Banner. The panel pairs with a retroreflective sensor (860-1692), bouncing lasers back precisely for a practical position detection setup. As it has reflective dimensions of 100 (W) x 55mm (H), the unit provides a broad target to minimise the hassle of aligning equipment. Mounting the item to a wall is a doddle with its handy screw-hole flanges. It shrugs off issues found in tough environments, as a reflectivity factor of 1.5 shows the component returns plenty of light for reliable reflecting through dust and smoke.
Features & Benefits
• Robust acrylic body, cutting down on wear from impacts
• Adhesive on the rear to maintain a secure surface hold against movement
• Works with many photoelectric sensor models, ensuring wide compatibility
• Handles temperatures up to +50°C for safe use in demanding conditions
Applications
• Automotive industry
• Distribution centres
• Industrial robotics
• Pick and pack lines
What size screws do I need to mount this reflector?
You can fix it to a wall using standard 5mm-diameter screws, so finding compatible fasteners is a cinch.