Sensata / Cynergy3 OLS2 Series Optical Sensor Level Sensor, Chassis Mount, NO-Rated, Polytetrafluoroethylene, Housing

모든 Level Sensors 열람하기

Subtotal (1 unit)*

₩82,641.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩82,641.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
780-0318
제조사 부품 번호:
OLS200D3LSH
제조업체:
Sensata / Cynergy3
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sensata / Cynergy3

Product Type

Level Sensor

Device Type

Optical Sensor

Mount Type

Chassis Mount

Housing Material

Polysulfone

Cable Length

250mm

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

80°C

Maximum DC Voltage

15.4V dc

Maximum Current

2.5mA

Maximum Pressure

7bar

Gasket Material

Polytetrafluoroethylene

Standards/Approvals

No

Series

OLS2

Hazardous Area Certification

NO

Thread Size

M12 x 1

COO (Country of Origin):
GB

Sensata Cynergy3 Optical Sensor Level Switch, Transistor Output - OLS2 Series - OLS200D3LSH


Use this optical sensor level switch from Sensata Cynergy3's OLS2 series for liquid detection in your industrial systems. It has an infrared emitter and a phototransistor, both of which are aligned with a cone. Upon contact with a liquid, the coupling is reduced as the infrared light escapes due to refraction. The body material is made from polysulfone, a durable material that's resistant to degradation from hot liquids. This device is useful in a variety of applications from dry pump protection to leak detection.

Features and Benefits


• Cable length of 250mm for access to hard to reach areas

• Operating temperature range of -25°C to +80°C makes it suitable for use in extreme environments

• Compact design for space efficiency

How do I install this sensor?


This sensor can be installed on either the side or bottom of a tank, but not at the top facing downwards. Drill a 12mm hole on a flat surface, making sure it's free of burrs to prevent leakage. You can then either insert the device into the hole or screw it into an M12x1 socket.

관련된 링크들