Recom IP67 1 Output LED Driver, 40V dc, 8 V dc, 28 W, 500mA PWM LED Driver

모든 LED Drivers 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
포장 옵션
RS 제품 번호:
757-7276
제조사 부품 번호:
RBD-12-0.50/W
제조업체:
Recom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Recom

Product Type

LED Driver

Output Voltage

40V dc, 8V dc

Maximum Output Power

28W

Input Voltage

36V dc

Mount Type

Through Hole

Sub Type

LED Driver

Dimming Operation

PWM

Input Voltage Type

DC

Terminal Type

Pin

IP Rating

IP67

Operating Modes

Constant Current

Driver Current

500mA

LED Voltage

36V, 8V

Number of Outputs

1

Standards/Approvals

RoHS Compliant

Series

RBD-12

Configuration

Enclosed

Primary Type

DC-DC

Power Dissipation

2.33W

COO (Country of Origin):
TW

RECOM LED Driver, DC Input Type, 0 to 500mA Output current - RBD-12 Series - RBD-12-0.50/W


Take charge of your lighting with this LED driver from RECOM. By converting inputs between 8 and 36V DC into an 8 to 40V DC supply voltage, it's on hand to reliably power LEDs without overheating or the irritation of flickering. This keeps your bulbs performing at a high level, allowing them to shine on through. A mean time between failures of 1.7 million hours means this component can stay the distance.

• High efficiency of 90%, so it's an energy-saving device

• Digital and analogue dimming control options give you greater functionality

• Maximum operating humidity level of 95% RH for use in areas with high levels of water vapour

• Low weight of 17g to avoid putting strain on mounting surfaces

• Compact dimensions of 32.60 (L) x 16.65 (W) x 11.10mm for mounting in small areas

Applications


• Vehicle headlamps and taillights

• Hotels and restaurants

• Retail lighting systems

Can I use this unit in challenging conditions?


Yes, you can. This reliable LED driver is designed to power systems in a temperature range between -40°C and +75°C.

Recom LIGHTLINE 3-20W Constant Current Step Up Step Down LED Driver - RBD-12 Ser


LIGHTLINE RBD-12 series 3-20W constant current step up step down LED drivers. These RBD-12 series PCB mount constant current LED drivers have digital PWM and analogue dimming control and Vref output. Typical applications for these constant current LED drivers include solar powered lighting, traffic signalling and transportation lighting.

PCB through hole mount or wired versions

Digital PMW and analogue dimming

High efficiency of 90%

Short circuit protection and over temperature shutdown

8-40 Vdc output voltage

LED Drivers


Note

MTBF: MIL-HDBK217F at 25°C
Quoted temperature ranges are without derating

Standards

Meets EN-60950-1 and UL-60950-1

관련된 링크들