제조사부품번호

Recom LED Driver, 2/40 V dc Output, 20 W Output, 500 mA

RS 제품 번호:: 131-4725
제조사 부품 번호:: RACD20-500-LP
제조업체:: Recom

Recom LED Driver, 2/40 V dc Output, 20 W Output, 500 mA

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩21,751.60

제한된 재고

25 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 1	₩21,751.60
2 +	₩21,093.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 131-4725
제조사 부품 번호:: RACD20-500-LP
제조업체:: Recom

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Recom
	Output Voltage	2/40 V dc
	Product Type	LED Driver
	Maximum Output Power	20W
	Input Voltage	264 V ac
	Mount Type	Screw
	Sub Type	LED Driver
	Terminal Type	Screw
	Input Voltage Type	AC
	IP Rating	IP20
	LED Voltage	198/264 V
	Driver Current	500 mA
	Operating Modes	Constant Current
	Series	RACD20-LP
	Standards/Approvals	CB, CE, EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61000-4-11 Criteria B, EN 61000-4-11 Criteria C, EN 61000-4-2 Criteria B, EN 61000-4-3 Criteria A, EN 61000-4-4 Criteria B, EN 61000-4-5 Criteria C, EN 61000-4-6 Criteria A, EN 61347-1, EN 61347-2-13, EN 61493, EN 61547, ENEC, ERP Compliant, IEC 61347-1, IEC 61347-2-13, IEC/EN 62384
	Number of Outputs	1
	Configuration	Enclosed
	Power Dissipation	800mW
	Primary Type	AC-DC

	모두 선택
	브랜드 Recom
	Output Voltage 2/40 V dc
	Product Type LED Driver
	Maximum Output Power 20W
	Input Voltage 264 V ac
	Mount Type Screw
	Sub Type LED Driver
	Terminal Type Screw
	Input Voltage Type AC
	IP Rating IP20
	LED Voltage 198/264 V
	Driver Current 500 mA
	Operating Modes Constant Current
	Series RACD20-LP
	Standards/Approvals CB, CE, EN 55015, EN 61000-3-2 Class C, EN 61000-3-3, EN 61000-4-11 Criteria B, EN 61000-4-11 Criteria C, EN 61000-4-2 Criteria B, EN 61000-4-3 Criteria A, EN 61000-4-4 Criteria B, EN 61000-4-5 Criteria C, EN 61000-4-6 Criteria A, EN 61347-1, EN 61347-2-13, EN 61493, EN 61547, ENEC, ERP Compliant, IEC 61347-1, IEC 61347-2-13, IEC/EN 62384
	Number of Outputs 1
	Configuration Enclosed
	Power Dissipation 800mW
	Primary Type AC-DC

RECOM LED Driver, Enclosed Configuration, AC/DC Input Voltage - RACD20-LP Series - RACD20-500-LP

Need a way to provide power to your lighting array? With this LED driver from RECOM, you can make light work of it. The device takes input signals of 230V AC and converts them to outputs between 2 and 40V DC with a constant current of 500mA. This smooth and steady supply helps to extend the life of your LEDs. Thanks to a mean time between failures of 30,000 hours, you can be sure this bright spark is a long-lasting solution.

• -20°C to +45°C operating temperature range indicates you can use it in challenging conditions

• High efficiency of 85%, so it's an energy-saving component

• IP20 rating for protection from objects larger than 12mm

• Operating humidity range between 5 and 85% RH for use in areas with high levels of non-condensing water vapour

Applications

• Coving lighting

• Shelving and furniture design

• Troffer lighting systems

What's the power rating of this unit?

This LED driver supplies up to 20W of power from a 75g package, so it's small but mighty.

How much input current does this unit take?

This LED driver has an input current rating of 210mA, for wide compatibility.

20W Constant Current LED Driver, RACD20-LP Series

Low Profile case (13 mm height max.)

230 V ac input voltage LED Power Supply

Fully Protected for Short Circuit, Open Circuit, Over Load, Over Voltage and Over Temperature

Low Standby Power, ErP conform

Screw Terminal Block Input/Output with Cable Clamps