제조사부품번호

STMicroelectronics ALED7709ATR Lighting Controller, 4.5/42 V 200 mA 24-Pin QFN

RS 제품 번호:: 275-1304
제조사 부품 번호:: ALED7709ATR
제조업체:: STMicroelectronics

STMicroelectronics ALED7709ATR Lighting Controller, 4.5/42 V 200 mA 24-Pin QFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩10,734.80

일시적 품절

196 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
2 - 48	₩5,367.40	₩10,734.80
50 - 98	₩4,559.00	₩9,118.00
100 - 248	₩3,929.20	₩7,858.40
250 - 998	₩3,731.80	₩7,463.60
1000 +	₩3,666.00	₩7,332.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 275-1304
제조사 부품 번호:: ALED7709ATR
제조업체:: STMicroelectronics

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Product Type	Lighting Controller
	Output Current	200mA
	Input Voltage	4.5/42 V
	Input Voltage Type	DC
	Dimming Operation	Analogue
	Mount Type	Surface
	Package Type	QFN
	Number of Pins	24
	Maximum Output Voltage	42V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	150°C
	Width	5.1 mm
	Length	5.1mm
	Series	ALED7709ATR
	Height	0.9mm
	Standards/Approvals	RoHS
	Automotive Standard	AEC-Q100
	Minimum Output Voltage	4.5V

	모두 선택
	브랜드 STMicroelectronics
	Product Type Lighting Controller
	Output Current 200mA
	Input Voltage 4.5/42 V
	Input Voltage Type DC
	Dimming Operation Analogue
	Mount Type Surface
	Package Type QFN
	Number of Pins 24
	Maximum Output Voltage 42V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 150°C
	Width 5.1 mm
	Length 5.1mm
	Series ALED7709ATR
	Height 0.9mm
	Standards/Approvals RoHS
	Automotive Standard AEC-Q100
	Minimum Output Voltage 4.5V

Datasheet - ALED7709ATR

COO (Country of Origin):: TH

The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.

AEC-Q100 Grade1 qualified

Supports battery cranking events down to 4 V supply

STMicroelectronics ALED7709ATR Lighting Controller, 4.5/42 V 200 mA 24-Pin QFN

관련된 링크들