Infineon LED Driver IC, 8/24 V 2 mA 8-Pin PG-DSO-8

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 LED Driver ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 2500 units)*

₩1,424,100.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 4월 02일 부터 7,500 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
2500 - 10000₩569.64₩1,424,570.00
12500 +₩558.36₩1,395,900.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
233-4359
제조사 부품 번호:
ICL8810XUMA1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Output Current

2mA

Product Type

LED Driver IC

Input Voltage

8/24 V

Input Voltage Type

AC/DC

Dimming Operation

PWM

Maximum Output Power

125W

Mount Type

Through Hole

Package Type

PG-DSO-8

Number of Pins

8

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Width

4 mm

Length

5mm

Height

1.75mm

Standards/Approvals

RoHS

Series

ICL8810XU

Automotive Standard

No

The Infineon ICL8810 is a voltage mode controller for flyback topologies operating in quasiresonant mode and valley switching DCM. It is designed for low and high power lumen LED driver, requiring high power factor and efficiency. The flyback controller is capable of controlling SSR-CV an PSR-CV topologies. Offering a wide usage in low cost applications where a PFC functionality in dual stage topologies is required. For lighting applications, the IC offers a wide power range as well as a comprehensive set of protections, including a power limitation. The IC is easy to design in and requires a minimum number of external components.

Soft-start to reduce stress during turn-on

External start-up circuit control signal with Vcc support in light load operation

Reduced gate driver output voltage during start-up sequence and burst mode allowing smaller Vcc cap

Burst mode for very light loads and low system standby power consumption

관련된 링크들