Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- RS 제품 번호:
- 922-5655
- 제조사 부품 번호:
- HCPL-7800-300E
- 제조업체:
- Broadcom
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 tube of 50 units)*
₩554,882.00
일시적 품절
- 2026년 3월 02일 부터 150 개 단위 배송
- 추가로 2026년 5월 27일 부터 550 개 단위 배송
- 추가로 2026년 6월 17일 부터 550 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Tube* |
|---|---|---|
| 50 - 200 | ₩11,097.64 | ₩554,900.80 |
| 250 + | ₩10,764.88 | ₩538,244.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 922-5655
- 제조사 부품 번호:
- HCPL-7800-300E
- 제조업체:
- Broadcom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Broadcom | |
| Product Type | Isolation Amplifier | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 4.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole, Surface | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Isolation Voltage | 3750Vrms | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 100°C | |
| Height | 1.78mm | |
| Width | 7.62 mm | |
| Length | 9.8mm | |
| Standards/Approvals | IEC/EN/DIN EN 60747-5-2, CSA, UL 1577 | |
| Series | HCPL-7800 | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Broadcom | ||
Product Type Isolation Amplifier | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 4.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole, Surface | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Vos - Input Offset Voltage 0.3 mV | ||
Isolation Voltage 3750Vrms | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 100°C | ||
Height 1.78mm | ||
Width 7.62 mm | ||
Length 9.8mm | ||
Standards/Approvals IEC/EN/DIN EN 60747-5-2, CSA, UL 1577 | ||
Series HCPL-7800 | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
관련된 링크들
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- HCPL-7800-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- HCPL-7800A-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP
- HCPL-7800A-500E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP
- HCPL-7800A-000E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP
- HCPL-7510-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP